Select your vehicle

Bushwacker Fender Flare Edge Trim – 000046-01

Bushwacker

$58.70In stock
Buy on Amazon

See similar parts on Amazon

Price and availability as of Nov 18, 2026 1:30 AM MST, from Amazon.com, and subject to change. The Amazon listing has the current details.

Check out with your Amazon account. Amazon handles delivery and returns.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Wiper style fender flare edge trim
  • 30 ft. length with adhesive attachment
  • Helps flares sit tight against the body
  • Bushwacker part number 000046-01

Description

Overview

The Bushwacker 000046-01 is a wiper style fender flare edge trim, 30 ft. long, with adhesive attachment. The trim follows the flare edge and keeps the flare close to the body, reducing gaps. It is universal fit, so check the match to your flare and body before use.

Key features

  • Wiper style profile
  • 30 ft. length
  • Adhesive attachment
  • Helps flares sit tight against the body

Adhesive edge trim tips

Edge trims close the gap between a flare and the body panel, and a wiper style profile flexes to follow curves. Because the trim sits in the visible seam, even small misalignment shows. Adhesive versions depend on a clean, dry surface, so the bond holds when the vehicle sees road spray and sun.

Surface prep matters more than the trim itself. Wipe the flare edge and body with a solvent-free cleaner, let it dry, and avoid touching the adhesive side. Warm the trim gently if the day is cold, since cold adhesive grips poorly. Once the trim is pressed on, roll it firmly to remove air pockets.

Check the trim after rough trails and washes. Lifted corners, dirt under the edge or peeling along curves mean the bond is weakening. Clean and re-adhere the section early, before water and grit work further behind the trim. Keep a small roll of spare trim if the vehicle sees heavy use.

  • Clean and dry both surfaces before applying
  • Test-fit before removing the backing
  • Warm the trim in cold weather
  • Recheck corners after rough trails

Specifications

Brand Bushwacker
Part number 000046-01
UPC 90689112217
Style Wiper
Length 30 ft.
Attachment Adhesive

Vehicle fitment

Vehicle fit is universal, and no vehicle is confirmed. Fit depends on the flare and body on your vehicle, so compare the trim with your flare edge before use.

Installation notes

Adhesive trims need a clean, dry mounting surface. Test-fit the trim along the flare before removing the backing so the position is right on the first pass.

What’s included

One wiper style edge trim with adhesive attachment, 30 ft. long.

SKU: B/W000046-01 Category:

Specification

Shipping weight 1.00 lbs
Package dimensions 6.00 × 3.30 × 3.30 in
brands

Questions & Answers

What is part number 000046-01?

It is a Bushwacker wiper style fender flare edge trim, 30 ft. long, with adhesive attachment. The UPC is 90689112217, and the trim is labeled universal fit.

How long is the trim?

The trim is 30 ft. long. Measure the flare edge you plan to treat before installing, and cut only after a test fit so the length suits your flare.

Is mounting hardware included?

No mounting hardware is confirmed for this trim. It uses adhesive attachment, so confirm the surface is clean and the adhesive is in good condition before installing.

Can I remove an adhesive edge trim and reuse it?

Usually not well. Removing it often stretches the trim and weakens the adhesive. If you must remove it, warm the trim gently, peel slowly and clean off the residue before a new install.

Does a wiper style trim need anything besides adhesive?

Some installs benefit from a flexible sealant along the flare edge to block water and grit. Choose one that suits the paint and plastic, and keep the trim clean while it cures.

Ready to order?

Order this part on Amazon and check out with your Amazon account. Amazon handles delivery and returns.

Buy on Amazon