Chevrolet Blazer Suspension
140 suspension listed for the 1969–2026 Chevrolet Blazer
Every part on this page is listed by its maker for this model; the most represented brands are Skyjacker, Pro Comp Suspension and Rancho. Open a part for its specs, part number and the exact model years and trims it covers, or select your year below to check fitment on every page.
Narrow it down: Shock Absorbers 98
Showing 1–24 of 140 resultsSorted by popularity
-
Shock Absorbers
Pro Comp ES3000 Series Shock Absorber – 324509
- Rear shock for a long list of Chevrolet, GMC, Dodge, Ford, Jeep, Mazda, Toyota, Isuzu and Mercury trucks and SUVs
- Part 324509, ES3000 Series, rated for a 1 to 4 in. lift
- Extended length 24.84 in, collapsed length 14.82 in, travel 10.02 in
- Loop upper and lower mounts, hydraulic, non-adjustable
SKU: EXP324509 -
Leaf Spring
Skyjacker Softride Leaf Spring Rear – CR18S
- Skyjacker CR18S Softride rear leaf spring, one spring per part number
- Fitment lists 1969–1999 Chevrolet and GMC K10, K20, Blazer, Tahoe and Yukon models
- Rubber bushings pre-installed; rated for a 7 and up inch lift height range
- Part number CR18S, UPC 80369612143
SKU: SKYCR18S -
Leaf Spring
Skyjacker Softride Leaf Spring Rear – CR16S
- Fits listed 1968–1999 Chevrolet and GMC trucks, Suburbans, Tahoe and Yukon models
- Part number CR16S, rear single leaf spring
- Rubber bushings pre-installed
- Lift height range 5 to 6.99 inches
- American steel with limited lifetime warranty
SKU: SKYCR16S -
Shock Absorbers
Rancho RS9000XL Series Shock Absorber – RS999124
- Rancho RS999124 rear RS9000XL shock absorber, listed with 0 in. lift/drop.
- Fitment list covers 1982–2004 Chevrolet, GMC, Cadillac, Dodge, Isuzu and Oldsmobile models.
- 18mm chrome rod, 2.75 in. (70mm) body and 9-position tuning.
- Covered by a limited lifetime warranty.
SKU: RANRS999124 -
Shock Absorbers
Rancho RS5000X Series Shock Absorber – RS55124
- Fits 1982 to 2005 Chevrolet, GMC, Cadillac, Dodge, Isuzu and Oldsmobile vehicles
- Rear position, direct fit, gas charged
- Part number RS55124, UPC 10039703007754
- Lift height w/0 in. Lift/Drop; Limited Lifetime Warranty
- 16mm nitro-carburized rod and 35mm full-displaced bore
SKU: RANRS55124 -
Shock Absorbers
Rancho RS5000 Series Shock Absorber – RS5124
- Rancho RS5124 rear gas-charged shock, RS5000 Series
- Fits 1992–2005 Chevrolet Blazer, 1995–2000 Tahoe and 1992–2000 GMC Yukon
- Also fits 1999–2000 Cadillac Escalade and 1992–1999 Suburban models
- Lift rating w/0 in. Lift/Drop
- Ten-stage velocity sensitive valving, red protective boot included
SKU: RANRS5124 -
Shock Absorbers
Pro Comp ES9000 Series Shock Absorber – 929500
- Rear gas-charged shock, part number 929500, with loop-style upper and lower mounts
- Designed for a 6 in. lift; 29.83 in. extended and 17.32 in. collapsed
- Covers classic Chevrolet and GMC C/K-series trucks, Blazer, Suburban, Tahoe and Yukon, 1969–1999
- 10-stage velocity-sensitive valving, 12.51 in. travel
SKU: EXP929500 -
Shock Absorbers
Pro Comp ES9000 Series Shock Absorber – 914515
- Pro Comp ES9000 front shock, part number 914515, stem upper and loop lower mounts
- Extended 14.71 inch, collapsed 9.56 inch, travel 5.15 inch
- Long fitment list: Chevrolet, GMC, Dodge, Ford, Isuzu, Mazda, Mitsubishi and Toyota trucks from 1981 to 2011
- Rated for 0 in. lift or drop; 10-stage valving, non-adjustable
SKU: EXP914515 -
Shock Absorbers
Rancho RS9000XL Series Shock Absorber – RS999190
- Rear RS9000XL shock for 1988–2000 Chevrolet and GMC C, K, R and V series trucks and Suburbans
- Also listed: 1992–2000 GMC Yukon, 1995–2000 Chevrolet Tahoe, 1994–2003 Chevrolet S10 (ZR2)
- Rear position, direct fit, 1 to 4 in. lift range
- Nine-position manual or remote tuning
SKU: RANRS999190 -
Shock Absorbers
Rancho RS7000MT Monotube Shock – RS7190
- Rear Rancho RS7190 gas charged monotube shock, RS7000MT series
- Lift range of 1 – 4 in.
- Fits many Chevrolet and GMC trucks, SUVs, Blazer, Jimmy and Sonoma models
- Ten stage velocity-sensitive valving and 14mm chrome rod
- Protective boot included
SKU: RANRS7190 -
Shock Absorbers
Tuff Country SX6000 Shock Absorber – 62231
- Tuff Country SX6000 front shock absorber, part number 62231
- Hydraulic, twin-tube design with multi-stage valving
- Polyurethane bushings
- Lift note: w/Tuff Country Lift Kits Only
- Covers 1967 to 2013 Chevrolet, GMC, Dodge, Ram, Ford and Jeep vehicles
SKU: T/C62231 -
Shock Absorbers
Tuff Country SX6000 Shock Absorber – 62201
- Tuff Country SX6000 front shock absorber, part number 62201, for 2 inch lifts
- Twin-tube cellular gas hydraulic design with multi-stage valving and polyurethane bushings
- Designed for use with Tuff Country lift kits only
- Sold individually; UPC 698815622014
SKU: T/C62201 -
Shock Absorbers
Tuff Country SX8000 Shock Absorber – 61231
- Tuff Country SX8000 front shock absorber, part number 61231
- Twin-tube, nitrogen gas charged design intended to limit fading
- Heavy-duty 5/8 inch piston rod with polyurethane bushings
- Fits 1967 to 2006 Chevrolet, GMC, Dodge, Ford and Jeep vehicles
- Sold individually
SKU: T/C61231 -
Shock Absorbers
Skyjacker Softride Nitro Shock Absorber – N8051
- Front gas-charged Nitro shock, part number N8051
- Fits 1967-1991 Chevrolet and GMC K, V and C series trucks
- 150 PSI nitrogen gas charge, twin tube construction
- Rated for 2 – 5 in. lift, with red polyurethane bushings and a red boot
SKU: SKYN8051 -
Shock Absorbers
Skyjacker Softride Nitro Shock Absorber – N8023
- Rear Skyjacker Softride Nitro shock, part number N8023
- Rear position; can be used at the front or rear
- Fits a broad range of trucks, SUVs and Jeeps from 1955 to 2005
- Lift height w/1 – 2.5 in. Lift
- For suspension lifts only; will not lift the vehicle
SKU: SKYN8023 -
-
Shock Absorbers
Skyjacker BlackMAX Shock Absorber – B8551
- Front Black MAX shock for listed 1967–1991 Chevrolet and GMC K-series, V-series and Blazer trucks
- Part number B8551; extended length 22.58 in., collapsed length 13.71 in.
- Direct fit with black boot included
- Fitment list runs to 38 named entries across Chevrolet and GMC models
SKU: SKYB8551 -
Shock Absorbers
Skyjacker Softride Nitro Shock Absorber – N8060
- Rear Skyjacker Softride Nitro shock, part number N8060, with 150 PSI nitrogen gas
- Fits Ford, Chevrolet, GMC, Mazda and Toyota trucks and SUVs from 1965 to 2018, by model and year
- Bonded iron piston and chromed piston rod
- Red polyurethane bushings and red boot
- Carries a limited lifetime warranty
SKU: SKYN8060 -
Shock Absorbers
Skyjacker M95 Performance Monotube Shock Absorber – M9521
- Front Skyjacker M95 monotube shock, part number M9521, for 0 to 1.5 in of lift
- Fits classic 1967 to 1991 Chevrolet and GMC K-series and V-series trucks and Suburbans
- Also lists 1969 to 1974 and 1987 to 1991 Chevrolet Blazer and 1970 to 1991 GMC Jimmy
- Gas monotube body with 46mm bore
- Shock boot included, sold as each
SKU: SKYM9521 -
Shock Absorbers
Skyjacker Softride Hydro Shock Absorber – H7060
- Skyjacker Softride Hydro rear shock, part number H7060
- Listed fitment covers Chevrolet, Ford, GMC, Mazda and Toyota trucks and SUVs
- Hydraulic twin tube with 5/8 inch hardened double chrome rod
- Confirm the lift range your suspension needs before ordering
SKU: SKYH7060 -
-
Shock Absorbers
Rancho RS9000XL Series Shock Absorber – RS999151
- Front position; fits 1968–1991 Chevrolet and GMC K and V series pickups, Suburbans and Blazers
- Direct-fit RS9000XL gas-charged shock
- 2.75-in. (70mm) body with 18mm chrome rod
- Lift height is w/0 – 2 in. lift.
- Protective boot included
SKU: RANRS999151 -
Shock Absorbers
Rancho RS9000XL Series Shock Absorber – RS999123
- Front position; fits 1983 to 2005 Chevrolet, GMC, Isuzu and Oldsmobile trucks and SUVs
- Direct-fit RS9000XL gas-charged shock
- 2.75-in. (70mm) body with 18mm chrome rod
- 9-position tuning, manual or remote
- Protective boot included
SKU: RANRS999123 -
Shock Absorbers
Rancho RS9000XL Series Shock Absorber – RS999112
- Rancho RS999112 rear RS9000XL shock absorber, designed for a 4 in. lift.
- Fitment list covers Chevrolet, GMC, Ford, Dodge, Mazda and Toyota trucks from 1966 to 2009.
- 2.75 in. (70mm) body with an 18mm chrome rod and 9-position tuning.
- Nitrogen gas charged, liquid metallic finish, protective boot included.
SKU: RANRS999112
