Overview
The Skyjacker CR18S is a Softride rear leaf spring for Chevrolet and GMC K-series and V-series trucks, with each part number covering one spring. It is a progressive multileaf pack with pre-installed rubber bushings, rated by Skyjacker for a 7 and up inch lift height range.
The spring is made with American steel, and its load capacity meets the original equipment rating or better. Fitment runs from 1969 through 1999 across Chevrolet and GMC pickups, Suburbans, Blazers, Tahoes and Yukons.
Key features
- Progressive multileaf pack construction
- Rear position, single spring
- Rubber bushings come pre-installed
- Rated for a 7 and up inch lift height range
- American steel construction
- Limited Lifetime Warranty, per the manufacturer
Alignment and axle support
A rear spring with a 7 and up inch lift range changes axle position noticeably, so the work should be followed by a check of the driveline angles and a wheel alignment. Rear alignment affects tire wear and straight-line tracking, and a misaligned rear end can make the truck feel unsettled at speed. Plan the job on a level surface with the truck safely supported.
Support the axle on jack stands before removing the original spring, and never work under a vehicle held only by a jack. Inspect the spring hangers, shackles and brake lines while the axle is down. Brake lines can be stretched by a higher axle, so their slack should be checked before driving.
- Support the axle on jack stands
- Inspect hangers and shackles while the axle is down
- Check brake line slack after the swap
- Schedule a rear alignment
Specifications
| Brand | Skyjacker |
|---|---|
| Part number | CR18S |
| UPC | 80369612143 |
| Product line | Softride leaf spring |
| Position | Rear |
| Spring quantity | Single spring |
| Bushings included | Rubber bushings included |
| Lift height range | 7 and up inches |
| Fitment | Direct fit |
| Material | American steel |
| Warranty | Limited lifetime |
Vehicle fitment
The manufacturer fitment list covers 1969–1974 and 1987–1994 Chevrolet Blazer, 1975–1986 Chevrolet K5 Blazer, 1969–1986 Chevrolet K10 and K20 pickups and Suburbans, 1987–1991 Chevrolet V10, V20 and V1500/V2500 Suburbans, 1995–1999 Chevrolet Tahoe, 1970–1991 GMC Jimmy, 1968–1986 GMC K15, K25, K1500 and K2500 trucks, 1987–1991 GMC V1500 and V2500 trucks and 1992–1998 GMC Yukon.
Chevrolet Tahoe years before 1995 and Chevrolet C/K trucks from 1988 onward that are not on the list are not covered. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The rubber bushings are already installed, so no separate bushing kit is needed. Because the lift range starts at 7 inches, plan a wheel alignment and a driveline angle check after the swap. Support the axle on jack stands before removing the original spring.
What’s included
One rear leaf spring with pre-installed rubber bushings.
Not included: a second spring for the opposite side, since each part number covers one spring.







