Overview
The Pro Comp Alloy Wheels hub spacer, part number HR8306, is a replacement spacer for a wheel hub. A spacer like this sits between the hub and the wheel, so the wheel mounts in the position the spacer sets.
It is a universal fit. Measure your hub and confirm the spacer matches before installing it, since a mismatch can leave the wheel mounted off-center.
Key features
- Hub spacer
- Universal fit
Spacers and wheel centering
A spacer centers the wheel on the hub when its bore and thickness suit the setup, so a wheel that looks slightly off after fitting often points to a size mismatch. Start by checking the spacer’s bore against the hub and the wheel’s center bore before tightening anything. Hand-tighten the nuts evenly in a star pattern to seat the wheel squarely.
Thicker spacers push the wheel further out, which changes clearance to brake calipers and fender edges. Recheck those clearances with the wheel mounted, and look over the studs for enough thread engagement. Alloy wheels can mark easily, so use a soft cloth on the spacer and mounting face during fitting.
- Check bore fit before tightening
- Tighten nuts in a star pattern
- Verify clearance to calipers and fenders
- Inspect studs for full thread engagement
Specifications
| Brand | Pro Comp Alloy Wheels |
|---|---|
| Part number | HR8306 |
| Item code | PXAHR8306 |
| UPC | 844658022263 |
| Fitment listed | Universal fit |
Vehicle fitment
No vehicle is named for this hub spacer. Measure your hub and confirm the spacer matches it before ordering.
What’s included
The package contains one hub spacer.














