Overview
The Tuff Country 55902 is a lift kit for the 2005–2006 Toyota Tundra, offered for the Base, Limited and SR5 models. It gives a 4.5 inch front lift and a 3 inch rear lift, so the front is raised more than the rear.
The front uses a ball joint spacer and strut spacers, and the kit includes a skid plate, a spindle bracket and a steering gear bracket. A differential drop, a sway bar drop and a steering shaft extension are included as well. At the rear, the kit uses a rear block with U-bolts.
Shocks are not included, so the existing shocks are used or new shocks are fitted separately. Tuff Country says its lift kits are engineered for quality and simple installation, and that they are backed by a limited lifetime warranty.
Key features
- 4.5 inch front lift
- 3 inch rear lift
- Ball joint spacer
- Strut spacers
- Skid plate
- Spindle bracket and steering gear bracket
- Differential drop and sway bar drop
- Steering shaft extension and brake cable extension
Balancing front and rear lift
A front lift larger than the rear lift changes the relationship between the axles and the steering, so the truck sits with a different stance than a level kit. The front spacers, skid plate and spindle bracket shift the steering and suspension angles, while the rear block and U-bolts set the rear height. Because each side is adjusted separately, the new ride height should be checked against the tires and fenders before driving on rough roads.
Shocks are not included, so the existing units or new shocks must match the new ride height. A longer front lift can change how the truck handles at highway speeds, so test the steering and brakes at low speed before a full trip. Keep the U-bolts and spacer hardware checked for tightness after the first few drives.
- Check shock length against the new ride height
- Re-tighten U-bolts after the first drives
- Confirm tire clearance at full steering lock
Specifications
| Brand | Tuff Country |
|---|---|
| Part number | 55902 |
| UPC | 69881555902 |
| Front lift | 4.5 inch |
| Rear lift | 3 inch |
| Suspension type | Spacer |
| Rear lift method | Block |
| Shocks | Not included |
Vehicle fitment
It is a direct fit for the 2005–2006 Toyota Tundra in Base, Limited and SR5 trims.
Tundra model years outside 2005–2006 are not covered. Match your truck’s year, model and trim to this fitment before ordering.
Installation notes
The kit includes a steering shaft extension, a steering gear bracket and a differential drop, so the steering and driveline geometry both change. Check the alignment, the steering and the driveline angles after installation.
What’s included
The kit includes a ball joint spacer, strut spacers, a skid plate, a spindle bracket, a steering gear bracket, a differential drop, a sway bar drop, a steering shaft extension, a brake cable extension, a rear block and U-bolts.
Not included: Shocks.









