Overview
The Tuff Country 5 Inch Lift Kit with Hydro Shocks (part number T/C55907KH) is a Toyota Tundra lift kit for the 2005–2006 model years. The listed lift height range is 6 to 7 inches, and the kit is sold with hydro shocks.
The kit allows tires up to 33 inches and adds fender clearance for them.
Key features
- Allows use of tires up to 33 inches
- Heavy-duty replacement knuckles
- One-piece subframe
- Upper coil and strut spacers
- Differential drop brackets and sway bar drop brackets
- Steering shaft extension
- Rear blocks with U-bolts
- Hydro shocks included
Installing a larger Tundra lift
A lift this size changes the front and rear geometry, so the job goes beyond swapping springs. Heavy-duty knuckles, a one-piece subframe and drop brackets alter how the steering, driveline and sway bar sit, and the work is best done with the truck on a stand and the right tools.
Hydro shocks are a common upgrade alongside a lift because the longer suspension travel needs a damper that controls it. Check that the shock length suits the new ride height and that the mounts clear the new knuckles at full travel. Inspect the upper coil and strut spacers for cracks during the install.
Expect the steering shaft and driveline angles to need attention. After the install, have the alignment set, recheck the steering shaft extension and U-bolts after the first few drives, and look for rub on the tires and body at full lock.
- Steering shaft and driveline angles
- Shock length for the new ride height
- Tire rub at full steering lock
- Brake line length after the lift
Specifications
| Brand | Tuff Country |
|---|---|
| Part number | T/C55907KH |
| Lift height range | 6 to 7 inches |
| Maximum tire size | 33 inches |
| Shock type | Hydro |
| Fitment type | Direct fit |
Vehicle fitment
It fits the 2005–2006 Toyota Tundra in Base, Limited and SR5 models.
The 2000–2003 Tundra and the 2007 and newer generations are not on this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The kit includes heavy-duty knuckles and a one-piece subframe, so it is more involved than a spacer install. Set the alignment and check the steering shaft and driveline angles when the job is done.
What’s included
Heavy-duty replacement knuckles, one-piece subframe, upper coil and strut spacers, differential drop brackets, sway bar drop brackets, steering shaft extension and rear blocks with U-bolts. Hydro shocks are included.









