Overview
The 22929 is a standard 2 inch lift kit for the 2009–2018 Ford F-150 4WD. It uses front coil spacers and rear add-a-leafs, and it is sold without shock absorbers.
It fits the FX2, FX4, King Ranch, Lariat, Lariat Limited, Limited, Platinum, SSV, STX, XL and XLT trims. The kit includes leaf spring center pins and a rear U-bolt kit, along with a hardware bag for installation.
Tuff Country says its lift kits are engineered for quality and simple installation and are backed by a limited lifetime warranty.
Key features
- 2 inch lift height
- Front coil spacers
- Rear add-a-leafs
- Leaf spring center pins
- Rear U-bolt kit
- Hardware bag included
Coil spacers and rear add-a-leafs
Coil spacers raise the front without changing the springs, so the spring rate stays the same while the ride height goes up. The rear add-a-leafs add a leaf to the pack, which changes how the rear sits under load. Both changes affect the front and rear alignment, so the steering and the ride height should be checked together after installation.
Look at the spacer hardware and the center pins for wear at each service. Brake hoses and the parking brake cable should be checked for stretch because the lift changes their length. Any spacer that shows cracking or distortion should be replaced before the truck is driven again.
- Check spacer hardware torque
- Inspect leaf center pins for wear
- Verify brake hose length after lifting
Specifications
| Brand | Tuff Country |
|---|---|
| Part number | 22929 |
| UPC | 698815229299 |
| Lift | 2 inch |
| Drive | 4WD |
| Suspension type | Spacer |
| Rear lift method | Add-a-leaf |
| Shocks | Not included |
Vehicle fitment
It fits the 2009–2018 Ford F-150 with FX2, FX4, King Ranch, Lariat, Lariat Limited, Limited, Platinum, SSV, STX, XL and XLT trims, in 4WD form.
It is written for 4WD trucks, and F-150 model years outside 2009–2018 are not covered. Confirm your vehicle’s year, model, drivetrain and trim before ordering.
Installation notes
Front coil spacers raise the front without changing the springs, and the rear add-a-leafs add height to the rear leaf pack. Check the front alignment and the rear ride height after installation.
What’s included
The kit includes front coil spacers, rear add-a-leafs, leaf spring center pins, a rear U-bolt kit and a hardware bag.
Not included: Shocks.









