Select your vehicle
-13%

SealSavers CV Savers (SxS) – SSCVSXS

SealSavers Products Inc

Shop SealSavers Products Inc UTV Axles on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • CV Savers SXS for side-by-sides, set of two
  • Installs over the existing CV joint boot
  • Black, with zip-ties included
  • Confirm fit for your vehicle’s year, model and trim before ordering.

Description

Overview

The SealSavers CV Savers SXS, part number SSCVSXS, is a set of two black CV joint boot protectors in the SXS version. Each one installs over the existing CV joint boot.

The SXS savers provide dual protection or work as an emergency backup. They store easily in a tool bag.

Key features

  • SXS version
  • Set of two
  • Dual protection, or an emergency backup
  • Installs over the existing CV joint boot
  • Zip-ties included
  • Black only

Side-by-side CV boot care

Side-by-sides spend more time in mud, sand, and water than most road vehicles, which puts extra stress on CV boots. A saver that installs over the existing boot adds a layer of protection against that debris. Before fitting, wash the boot and check for tears, cracks, or grease that has been flung out, since grit trapped under the saver will work against the boot.

Routine checks keep the setup working. After each hard run, look at the boots and the savers, and clean away packed mud. Re-check the zip-ties because vibration can loosen them over time. Keep the second set in the tool bag so a damaged boot can be covered on the trail, and replace the original boot when it is torn.

  • Wash the boot before fitting the saver
  • Inspect boots after hard runs
  • Re-check zip-ties regularly
  • Replace a torn original boot

Specifications

Brand SealSavers Products Inc
Part number SSCVSXS
Version SXS
Quantity Set of two
Color Black

Vehicle fitment

The SXS name points to side-by-side use. Check the size against the CV joint boot on your machine before ordering.

Confirm your vehicle’s year, model and trim before ordering.

Installation notes

Fit each saver over the existing boot and fasten it in place with the zip-ties in the package.

What’s included

The package is a set of two black savers, with zip-ties included.

Questions & Answers

Are these the side-by-side version?

Yes. The product name marks this model as SXS, so it is the side-by-side version of the CV Savers, sold as a set of two black savers with zip-ties.

Can they be used as a spare boot?

Yes. SealSavers says they can be used as an emergency back-up boot, and they can be stored easily in a tool bag.

What comes in the package?

A set of two black CV Savers, with zip-ties for installation over the existing CV joint boot. Check the package contents against your installation before starting.

How do I tell if the CV boot on a side-by-side is leaking?

Look for grease spots on the inside of the wheel, the knuckle, or the boot itself. Grease that has been thrown out, or a boot that looks dry and cracked, means the joint is losing lubrication and the boot should be inspected.

Is a saver a substitute for replacing a damaged boot?

No. A saver is a cover that can protect a boot temporarily, but it does not seal a tear. Replace the damaged boot as soon as practical, and use the saver as a stopgap if the trail demands it.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop SealSavers Products Inc UTV Axles on Amazon