Overview
The Dana Spicer 708084 is a Dana 60 front spindle seal kit with a newer seal design intended to replace the older V-lip style.
It fits Ford, GM and Dodge axles that use the older V-lip seal 700014, as well as Dana 60 front spindles.
Key features
- Newer seal style that Dana Spicer says works better than V-lip seals
- Designed for axles that use the older V-lip seal 700014
- Dana 60 front axle type
- Seal kit format for front spindle sealing
Spindle seal replacement
A spindle seal sits between the spindle and the hub, keeping grease in the bearing area and water and road grit out. When it wears, the lip can crack or lose its grip on the spindle, and the first symptom is often grease on the inside of the wheel or on the brake backing plate. Replacing the seal before that point is far cheaper than replacing bearings that have run dry or taken on water.
Before ordering, look closely at the existing seal and the spindle surface. A groove or scoring where the lip rides means the spindle may need work before a new seal can seal properly. Clean the spindle and check the bearing races while the hub is off, since the seal and bearing usually come out together.
- Look for grease on the brake backing plate
- Check the spindle surface for grooves
- Replace worn wheel bearings at the same time
- Use fresh grease in the hub
Specifications
| Brand | Dana Spicer |
|---|---|
| Part number | 708084 |
| Axle location | Front |
| Axle type | Dana 60 |
| Replaces | Older V-lip seal 700014 |
Vehicle fitment
Ford, GM and Dodge axles that use the older V-lip seal 700014 are covered, with the Dana 60 front axle as the axle type. Check the seal currently fitted before ordering.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Check your existing seal style first, since the kit is aimed at axles that use the older V-lip seal.
What’s included
Check the package contents against your installation before starting.









