Overview
The Trail Master 2.5-inch Lift Kit with NGS Shocks, model TM3625-20013, is a leaf spring lift that adds 2.5 inches of height. It includes U-bolts, hardware and NGS nitrogen gas shocks, and it allows 32×11.50 tires.
It fits Jeep CJ5, CJ7 and Scrambler models.
The 2.5-inch lift is built on lifted leaf springs, and the U-bolts and hardware are included, so the springs come with the parts needed to fit them.
The NGS nitrogen gas shocks are included and provide ride quality improvements. The kit allows 32×11.50 tires and gives increased ground clearance from the lift.
Trail Master says all of its kits include a lifetime warranty, and that applies to this leaf spring kit. Check the driveline and shock setup before installing, because a lift of this height can need driveline work on some vehicles.
The kit is for CJ5, CJ7 and Scrambler models, and the lifted leaf springs are the main part of the 2.5-inch lift. It includes NGS shocks and allows a maximum tire size of 32×11.50, so the kit is sized for that tire.
Confirm tire clearance and your vehicle’s year, model and trim before choosing this kit for an older Jeep, since the years differ by model.
Key features
- 2.5-inch lift with lifted leaf springs
- NGS nitrogen gas shocks included
- U-bolts and hardware included
- Allows 32×11.50 tires
- Increased ground clearance
Leaf spring lift basics
Leaf springs carry the weight of the body and axle and control how the axle moves under load. When a lift raises the body, the springs change angle and the pinion angle can shift, which is why driveline checks often go along with a lift of this height. The shocks also work at a different length, so their mounts and travel should be checked once the springs are in place.
After installation, retighten the U-bolts after the first few drives, since leaf spring hardware settles as the springs seat. During routine inspections, look for worn bushings, cracked or sagging leaves, oil at the shock bodies, and loose shackle hardware. Off-road, leaf springs flex more than stock, so check the spring eyes and mounts after rough trail days. Tire rubbing is another common issue after a lift, so test steering lock with the tires installed.
- Retorque U-bolts after the first drives
- Inspect shackles and spring eyes after trail use
- Check shock bodies for leaks
Specifications
| Brand | Trail Master |
|---|---|
| Part number | TM3625-20013 |
| UPC | 614901083422 |
| Lift height | 2.5 inches |
| Suspension type | Leaf spring |
| Rear lift method | Leaf springs |
| Shocks | NGS nitrogen gas, included |
| Tire size allowed | 32×11.50 |
Vehicle fitment
This kit fits these Jeep models:
- 1959 to 1983 Jeep CJ5
- 1976 to 1986 Jeep CJ7
- 1981 to 1985 Jeep Scrambler
Other Jeep models are not covered by this fitment. Confirm your vehicle’s year, model and trim before ordering.
What’s included
Lifted leaf springs, U-bolts, hardware and NGS nitrogen gas shocks.









