Overview
The Trail Gear 100086-1-KIT is an adapter plate kit that bolts one or more gear driven transfer cases to 1988–1995 Toyota 3.0L V6 five speed transmissions. It fits the 1988–1995 Toyota 4Runner and the 1988–1995 Toyota Pickup.
The updated design does not require modifying the transmission. Installation is still involved: the front and rear drive shafts must be retubed, a floorboard hole is needed for the second transfer case shifter, the speedometer cable must be extended, and the crossmember must be replaced.
Key features
- Bolts one or more gear driven transfer cases to the transmission
- Adapter plate for the 3.0L V6 five speed transmission
- Transmission does not require modification.
- Covers 1988–1995 Toyota 4Runner and Pickup models
Planning a transfer case swap
Running more than one transfer case changes the drivetrain layout enough that it should be planned as a whole, not bolted on. Each transfer case adds shafts, shifters and linkage, and the geometry of the driveline determines vibration and wear. Before cutting or retubing anything, measure how the shafts will sit and make sure there is clearance around the exhaust, fuel lines and brake lines.
Gear driven transfer cases need steady lubrication, so check fluid levels on each unit after installation and again after the first drives. Shifter linkage should move freely through every position, and the speedometer reading should be verified once the cable is extended. Keep records of the work so future service on the shafts and crossmember is easier to plan.
Specifications
| Brand | Trail Gear |
|---|---|
| Part number | 100086-1-KIT |
| Engine | 3.0L V6 |
| Transmission | Five speed |
| Transfer case type | Gear driven, one or more |
| Model years | 1988–1995 |
| Fitment type | Direct fit |
Installation notes
Installation requires retubing the front and rear drive shafts, adding a floorboard hole for the second transfer case shifter, extending the speedometer cable and replacing the crossmember.
Vehicle fitment
It fits the 1988–1995 Toyota 4Runner and the 1988–1995 Toyota Pickup.
Only 1988–1995 Toyota 4Runner and Pickup models fit. Confirm your vehicle’s year, model and trim before ordering.
What’s included
Confirm the kit contents against your installation before starting, including the hardware for the adapter and transfer cases.









