Overview
The Crown Automotive 986495 is an M20 transfer case shifter boot with a square bottom and accordion upper. It fits 1972–1975 Jeep CJ5 and CJ6 models.
The square bottom and accordion upper are the two design points named for this boot, so the shape is the main thing to match when you compare it with the boot you are replacing.
Key features
- Square bottom design
- Accordion upper section
- Designed as an M20 transfer case shifter boot
- Crown Automotive part number 986495
Replacing a worn shifter boot
The shifter boot seals the opening around the shifter lever so dirt, water and grit stay out of the transfer case cover and the shifter mechanism. A boot that is cracked, split or hardened will let debris work into the bore, which accelerates wear on the shifter and the bushings around it. Because the boot is a rubber part, age and heat exposure matter as much as miles driven.
When fitting a new boot, clean the cover and the shifter lever thoroughly so the seal sits flat. Check that the shifter lever still moves freely and that the boot does not bind at full travel. Replace the boot whenever the shifter is serviced, and inspect the transfer case cover for cracks or leaks that could let fluid escape around the new seal.
Specifications
| Brand | Crown Automotive |
|---|---|
| Part number | 986495 |
| UPC | 848399002294 |
| Bottom design | Square |
| Upper style | Accordion |
Vehicle fitment
Fits the 1972–1975 Jeep CJ5 in Base and Renegade trims, and the 1972–1975 Jeep CJ6 in Base trim.
Other CJ years and Jeep models are not in this list. Confirm your vehicle’s year, model and trim before ordering.
What’s included
Verify the contents against your installation plan before you start the job.









