Overview
The Omix-ADA 18606.04 is a single shifter boot for SR4, T4, T5 and automatic transmissions, and for the Dana 300 transfer case. It is a direct OE replacement built to original specifications.
It carries a limited five year warranty from Omix-Ada.
Key features
- Single boot
- Fits SR4, T4, T5 and automatic transmissions
- Fits the Dana 300 transfer case
- Direct OE replacement built to original specifications
- Limited five year warranty from Omix-Ada
Boot care and replacement
A shifter boot seals the opening around the shift lever so dirt, water and road grit stay out of the shift area. Rubber boots harden and crack with heat and age, and a split boot lets debris reach the shifter mechanism. Checking the boot during routine underbody inspections catches cracks early.
When replacing a boot, clean the surface around the shifter and remove any old sealant or residue. Make sure the boot sits evenly and is not stretched over the lever, since tension can split it again. If you run larger tires or lift the vehicle, the lever angle may change, so check the boot for clearance during the first drives.
- Look for cracks around the top ring
- Check that the boot is not torn at the base
- Replace a stiff or split boot before it lets debris in
Specifications
| Brand | Omix-Ada |
|---|---|
| Part number | 18606.04 |
| UPC | 804314037864 |
| Quantity | Single boot |
| Transmissions | SR4, T4, T5, automatic |
| Transfer case | Dana 300 |
Vehicle fitment
No Jeep year, model or trim is listed. The boot is identified only by transmission and transfer case names, so match both before you choose it.
Confirm your vehicle’s year, model and trim before ordering.
What’s included
One boot is described.
Not included: the shifter and any transmission or transfer case hardware.












