Overview
The Trail Gear 140254-1-KIT is the Rock Assault Trunnion Bearing Eliminator Kit. It replaces the trunnion bearing on a steering knuckle with a solid king pin style pin that runs in a hardened bushing.
Trunnion bearings are a common failure point for vehicles used in rock crawling and rock racing, regardless of bearing size. This kit removes the bearing and uses a solid pin in its place. No vehicles are named for this kit, so verify your vehicle’s year, model and trim before buying.
Key features
- Solid king pin style pin in place of a trunnion bearing
- Hardened bushing for the pin
- Pin and bushing made of bearing-quality material with high carbon content
- Zerk grease fittings for lubrication
- Grease passages and grooves machined into the pins
Trunnion wear and maintenance
The trunnion carries the knuckle load on a solid axle, so it sees heavy force when the tires articulate and turn at the same time. A worn trunnion bearing shows up as play in the knuckle, a clunk when turning from lock to lock, or uneven tire wear. Replacing the bearing with a pin changes how the joint is serviced, so greasing schedules matter more.
Choosing a bushing and pin setup means planning around lubrication and clearance. Grease the pin on a regular schedule and check the fittings for damage before each trip. When the knuckle comes apart, inspect the bore and bushing for scoring, and replace any part that shows wear beyond what cleaning removes.
- Clean and regrease the zerk fittings before every outing
- Check for play at the knuckle after hard rock runs
- Replace damaged grease fittings promptly
- Inspect the bushing whenever the knuckle is removed
- Use a grease suited to heavy-duty joints
Specifications
| Brand | Trail Gear |
|---|---|
| Part number | 140254-1-KIT |
| UPC | 70000621745 |
| Kit type | Trunnion bearing eliminator |
| Pin | Solid king pin style |
| Bushing | Hardened |
| Lubrication | Zerk grease fittings |
| Fitment type | Direct fit |
Vehicle fitment
No vehicles are named for this kit. Verify your vehicle’s year, model and trim before buying.
Confirm the knuckle model and year against your vehicle before ordering.
Installation notes
The grease fittings allow lubrication of the pin without disassembling the steering knuckle.
What’s included
The kit includes the king pin style pin and hardened bushing with zerk grease fittings.












