Overview
The Jeep 1791701 steering knuckle stop bolt is a stock replacement bolt that adjusts the turning radius on 2007–2016 Jeep Wrangler (JK) models, for 2 and 4-door vehicles.
A stop bolt limits how far the front wheels can turn, so turning radius depends on how it is set. It is a factory style replacement part with a direct fit design.
Key features
- Adjusts the turning radius
- Factory style stock replacement
- Direct fit design
- 2 and 4-door models
- Not high steer compatible and not cross over steering compatible
Setting the turning radius
The stop bolt sets a physical limit on steering travel, so it governs how close the tires can get to the inner fender or frame at full lock. Backing it out increases the turning circle, while tightening it shortens the turn and can prevent tire rub at the limit. Small adjustments make a noticeable difference, so change one side at a time and check clearance before driving.
Because the stop works against the steering knuckle and tie rod, it is usually checked together with the alignment. After any change, drive a slow figure eight in an open area and listen for binding, scraping or rubbing. Worn knuckle bushings and bent tie rods can make a stop bolt setting seem wrong, so inspect those parts when the turning feels uneven.
- Set both sides to the same position
- Confirm the tires clear the frame at full lock
- Recheck alignment after every change
Specifications
| Brand | Jeep |
|---|---|
| Part number | 1791701 |
| UPC | 70000521222 |
| Function | Turning radius adjustment |
| Quantity | 1 |
| Replacement type | Stock replacement |
| High steer compatible | No |
| Cross over steering compatible | No |
| Fitment type | Direct fit |
Vehicle fitment
It fits 2007–2016 Jeep Wrangler (JK) models, including the 70th Anniversary, Rubicon, Sahara, Sport, Sport S and X trims and the Unlimited versions of them.
The 2007–2016 range is narrower than the 2007–2018 range of other JK knuckle parts, so 2017 and 2018 Wranglers are not on this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
After setting the bolt, verify turning radius and alignment, because changing the stop position alters how far the front wheels travel.
What’s included
One stop bolt, supplied as a single piece.









