Overview
The Trail Gear 105052-3-KIT is a transfer case flange nut and a factory original replacement part. The -KIT suffix marks it as a kit, so check the included parts before starting.
Trail Gear’s general brand description mentions trucks, Jeeps and SUVs, but no vehicle is named for this nut.
Key features
- Transfer case flange nut
- A factory original replacement part
- It is a Direct Fit replacement.
- Title and part number identify it as a kit
Flange nuts and seal preload
A transfer case flange nut clamps the flange or yoke onto the output shaft, and it also sets the preload on the bearings that support that shaft. The right tightness keeps the seal seated and the bearings steady. Too little clamp force can allow leaks and play, while too much can shorten bearing life, so use the tightening value from your service procedure.
Before fitting, clean the threads and the flange face, and check the shaft for burrs or wear. Replace the nut if the threads are stretched or damaged. Start the nut square to the shaft so the threads do not cross. Check for seepage after the first drive and re-check the nut once it has settled.
- Clean threads and flange face before assembly
- Start the nut square to avoid cross-threading
- Re-check the nut after the first drive
Specifications
| Brand | Trail Gear |
|---|---|
| Part number | 105052-3-KIT |
| UPC | 70000621605 |
| Component | Transfer case flange nut |
| Description | Factory original replacement part |
| Fitment type | Direct Fit |
Vehicle fitment
Match the flange nut to your transfer case model first. Confirm fit for your vehicle’s year, model and trim before ordering.
Confirm your vehicle’s year, model and trim before ordering.
What’s included
The -KIT part number identifies this as a kit. Check the package contents against your installation before starting the work.









