Overview
The Trail Gear 303751-1-KIT is the Trail Safe front inner axle seal for the FJ80 Toyota Land Cruiser and the Lexus LX450. Trail Gear designed it to reduce oil leaks past the inner axle seal, and it is sold in pairs.
The inner seal lip is held against the axle by a garter spring that applies constant force around the full 360-degree circumference, which closes gaps that could let oil bypass the lip. The outer seal lip works as a secondary seal and keeps debris and other contaminants away from the inner lip. The outer flange keeps the seal from being pushed too far into the axle housing.
Key features
- Garter spring applies constant force around the seal lip
- Outer seal lip acts as a secondary seal against debris
- Outer diameter is 100% rubber coated, forming a static surface seal
- Outer flange limits how far the seal can be pushed into the axle housing
- Sold in pairs
Keeping axle seals sealing
An inner axle seal works where the axle shaft leaves the differential, so it sees the oil that lubricates the gears. Oil seeping along the shaft or dripping from the hub area usually means the lip is worn or the seal was installed off square. Check the sealing surface on the axle for grooves before fitting a new seal, since a rough surface can wear a new lip quickly.
Replacing inner seals is often done alongside the bearings or the axle bearing retainer, so inspect those parts while the housing is open. Keep the seal lip clean and lightly oiled before installing, and drive the seal in straight with the correct tool. Check the differential fluid level afterward, since a seal leak can lower fluid over time.
- Inspect the axle surface for grooves
- Install the seal square and fully seated
- Check fluid level after the first drive
Specifications
| Brand | Trail Gear |
|---|---|
| Part number | 303751-1-KIT |
| Position | Front inner axle seal |
| Application | FJ80 Toyota Land Cruiser and Lexus LX450 |
| Outer diameter coating | 100% rubber coated |
| Quantity sold | Pair |
| Fitment type | Direct fit |
Vehicle fitment
It fits the 1990–1997 Toyota Land Cruiser, identified as the FJ80 model, and the 1996–1997 Lexus LX450. Both vehicles use this same seal part number.
Other Toyota Land Cruiser generations and other Lexus models are not on the list. Confirm your vehicle’s year, model and trim before ordering.
What’s included
The package is sold in pairs, so it contains two inner axle seals.









