Overview
The Trail Gear TGI111315-1-KIT is a front greasable polyurethane bushing frame in black. It is an OEM replacement style frame, and its greasable bolts take threaded zerk fittings so the bushings can be greased after installation. It fits 1979–1995 Toyota pickups and 1984–1995 Toyota 4Runners.
Shackle bushings sit where the leaf spring shackle connects, and this frame is the front-position unit for the Toyota models named in the fitment section below.
Key features
- Greasable bolts with threaded zerk fittings that stay in place during greasing
- Polyurethane bushing construction
- Front position
- Black finish
- Long style, direct fit design
Greasing and upkeep
Greasable bushing frames change the maintenance picture. A standard polyurethane bushing needs no lubrication, but a greasable one can be serviced to keep the pivot quiet and free. Use a grease gun with the zerk fitting seated firmly, and pump slowly until fresh grease shows at the sleeve ends. Wipe off excess grease so dirt does not collect on the bolt heads.
Greasing only helps if the bolts stay in place. Check the threaded zerk fittings for damage before each greasing, and replace any that are stripped or seized. Look at the shackle bolts for looseness, and recheck their torque after the first few trail runs. Worn sleeves or cracked bushing faces mean the frame should be replaced rather than greased.
When choosing a frame, match the style to the leaf spring and shackle layout. Long and short styles can change the spring’s pivot length, so confirm the length before starting the swap.
- Grease the bolts before each off-road trip
- Keep zerk fittings clean and capped
- Inspect sleeves for play or cracking
Specifications
| Brand | Trail Gear |
|---|---|
| Part number | TGI111315-1-KIT |
| UPC | 70000621291 |
| Position | Front |
| Length | Long |
| Service | Greaseable |
| Type | Polyurethane |
| Color | Black |
| Fitment type | Direct fit |
Vehicle fitment
It fits the 1984–1995 Toyota 4Runner in DLX and SR5 trims and the 1979–1995 Toyota Pickup in Base, Base Turbo, DLX, DLX Turbo, SR5 and SR5 Turbo trims.
Verify your vehicle’s year, model and trim match before buying. Toyota years and models outside those ranges need a separate check.
Installation notes
The greasable bolts have zerk fittings on their heads, so grease can reach the bushings once the frame is in place. Lift and support the vehicle securely before removing the old shackle parts.
What’s included
One black front bushing frame with greasable bolts and threaded zerk fittings. Review what arrives in the box against the installation steps before starting.









