Overview
The Trail Gear 110110-1 is a square U-bolt designed for a front spring pack that is 2 in. thick and an axle tube with a 3 in. diameter. Square U-bolts clamp the axle to the spring pack, so the tube diameter and spring pack thickness have to match your setup.
Square U-bolts clamp the axle to the spring pack, so the tube diameter and spring pack thickness need to match your setup. Measure both before deciding.
Square U-bolts and spring packs
Square U-bolts wrap the axle tube and pass through the spring pack, so the clamp depends on both the tube diameter and the stack height. If the tube is worn or out of round, or the pack has settled, the clamp can sit loose on the axle. Look at the spring pack and axle seat for wear before fitting new hardware, since a worn seat will make any new U-bolt look like the problem.
Many setups use a matching set of plates with square U-bolts. Replacing the bolts together with the plates keeps the clamp square and evenly loaded. Re-torque the nuts after the pack has had some use, because it compresses slightly and the clamp settles. Keeping the leaves and the mounting points in good condition extends the life of the whole assembly.
- Measure the axle tube before buying
- Check the spring pack for cracked leaves
- Replace worn plates with the U-bolts
- Recheck clamp tightness after break-in
Specifications
| Brand | Trail Gear |
|---|---|
| Part number | 110110-1 |
| UPC | 70000649022 |
| Type | Square U-bolt |
| Spring pack thickness | 2 in. (front) |
| Axle tube diameter | 3 in. |
Vehicle fitment
Fit is set by the front spring pack and axle tube size. Confirm your vehicle’s year, model and chassis code before ordering, then compare the 2 in. pack and 3 in. tube with your own axle.
Confirm your vehicle’s year, model and trim before ordering.
What’s included
The square U-bolt is the only piece covered by this order. Check the package contents against your installation before starting, including nuts, washers and plates.







