Overview
The Rock Krawler RK04484 Large Joint Socket Tool is a socket assembly for rebuilding or repairing Krawler Joints. It is the tool needed to remove and install the Large Joint Retainer, RK04033.
The socket assembly needs a 3/8 drive ratchet, which is a separate item.
Key features
- Socket assembly for Krawler Joint rebuilds
- Designed for the Large Joint Retainer, RK04033
- Requires a 3/8 drive ratchet
- Joint tool with no vehicle fitment listed
Using the socket correctly
A socket used to turn a large joint retainer needs to sit square on the retainer so it does not slip and round the edges. Seat the tool fully before applying force, and keep your hand and the ratchet head in line with the retainer to avoid sudden turns.
Good preparation saves time. Clean the joint and the retainer threads, apply the lubricant the joint service calls for, and have the ratchet and any extension ready before you start.
Store the socket in a clean case so the drive end stays free of grit. Check the socket for cracks or rounded edges before each job, and replace it if the drive end shows wear.
- Seat the socket fully before turning
- Keep the drive end clean and dry
- Replace a worn or cracked socket
Specifications
| Brand | Rock Krawler |
|---|---|
| Part number | RK04484 |
| Type | Large Joint Socket Tool |
| Drive requirement | 3/8 drive ratchet |
| Used with | Large Joint Retainer, RK04033 |
Vehicle fitment
Confirm the joint size before use, since fitment is tied to the joint type rather than a vehicle.
Installation notes
Use a 3/8 drive ratchet with this socket assembly. Match it to the large joint retainer before starting work.
What’s included
Large Joint Socket Tool, part RK04484.
Not included: 3/8 drive ratchet.









