Overview
The Trail Gear Rear Bumper 120110-1-KIT is a bare, unpainted tubular steel rear bumper from Trail Gear’s Rock Defense line. Trail Gear builds it from 1020 DOM tubing, 1.75 inch in diameter with a .120 wall, and supplies it without paint and lightly oiled.
Four bumpers in the Rock Defense line fit either the 1984–1995 4Runner or the 1984–1995 Pickup. The model for 120110-1-KIT is unconfirmed, so confirm the vehicle before ordering.
Key features
- 1020 DOM tubing, 1.75 inch with a .120 wall
- Shipped unpainted and lightly oiled to prevent rust in transit
- 1020 DOM tubing is designed for dent resistance compared with HREW tubing.
- Direct-fit rear bumper with no receiver hitch
- Not rated for towing
Finishing a bare steel bumper
A bare steel bumper arrives without paint, so it needs a protective coating before regular use. Bare steel left exposed to road salt and moisture will start to rust, especially at welds and along the lower tubes. Cleaning the surface, removing the light oil and applying primer and paint before mounting helps extend the life of the bumper.
Mounting and fit deserve attention too. Check the mounting points against the frame before final tightening, and inspect the bolts and brackets after the first few trips. Because this bumper is not rated for towing, keep tow loads off it and use the hitch or frame points intended for that purpose.
- Remove oil with a degreaser before painting
- Use a self-etching primer on bare steel
- Check welds for cracks after the first trips
- Keep the bumper clear of tow loads
Specifications
| Brand | Trail Gear |
|---|---|
| Part number | 120110-1-KIT |
| UPC | 70000621731 |
| Product type | Rear bumper kit |
| Position | Rear |
| Material | 1020 DOM tubing, 1.75 inch with a .120 wall |
| Finish | Bare (unpainted, lightly oiled) |
| Receiver hitch | No; not rated for towing |
| D-ring mounts | Not included |
| Tire carrier | No |
Vehicle fitment
No vehicle is confirmed for the 120110-1-KIT. Four bumpers in this line fit either the 1984–1995 4Runner or the 1984–1995 Pickup, and the specific model for this part is unconfirmed. Confirm your vehicle’s year, model and trim before ordering.
Trail Gear also says its optional Rear Bumper to Frame Support Kit will not work with the 84-88 or 89-95 Pickup bumper. Confirm your vehicle’s year, model and trim before ordering.








