Overview
The Trail Gear Rear Bumper 120108-1-KIT is a bare, unpainted tubular steel rear bumper for the 1984–1988 Toyota Pickup. Trail Gear builds the bumper from 1020 DOM tubing, 1.75 inch in diameter with a .120 wall, rather than the HREW tubing used on many bumpers.
The 1020 DOM tubing is designed to resist denting and seam splitting better than HREW tubing. The bumper is not rated for towing.
Key features
- Made from 1020 DOM tubing, 1.75 inch with a .120 wall
- Supplied bare, unpainted and lightly oiled to prevent rust in transit
- Part of the Rock Defense bumper line; four models cover 1984–1995 4Runner and Pickup
- Direct-fit rear bumper kit
- Not rated for towing and has no receiver hitch
Rear bumper ownership tips
A rear bumper takes hits from obstacles and trail debris, so its mounting points carry more stress than the tubing alone. Check the frame brackets and bolts after rough trail use, and look for cracked welds or bent tubing where the bumper meets the frame. Because the bumper is not rated for towing, keep trailers and hitch loads off it entirely.
Bare steel needs a protective finish before the bumper sees rain, road salt or mud. Clean the surface, remove the light oil and apply primer and paint or a powder coat. Once coated, inspect the finish each season and touch up chips quickly to prevent rust from spreading under the coating. Let the coating cure fully before any trail use, so it is not scraped off during the first outing.
Specifications
| Brand | Trail Gear |
|---|---|
| Part number | 120108-1-KIT |
| UPC | 70000621729 |
| Product type | Rear bumper kit |
| Position | Rear |
| Material | 1020 DOM tubing, 1.75 inch with a .120 wall |
| Finish | Bare (unpainted, lightly oiled) |
| Receiver hitch | No; not rated for towing |
| D-ring mounts | Not included |
| Tire carrier | No |
| Fit type | Direct fit |
Vehicle fitment
It fits the 1984–1988 Toyota Pickup in base, DLX, SR5 and turbo trims. Confirm fit for your vehicle’s year, model and trim before ordering.
Trail Gear’s text says four models in this line fit either the 1984–1995 4Runner or the 1984–1995 Pickup, but the list for this part number stops at the 1984–1988 Pickup. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The bumper arrives bare and lightly oiled, so clean it and apply a coating of your choice before it sees weather. The optional Rear Bumper to Frame Support Kit will not work with the 84-88 or 89-95 Pickup bumper.









