Overview
The Pro Comp FD400 is a 4 inch drop pitman arm for power steering. It fits several Ford Bronco, Bronco II, Explorer, Explorer Sport, F-100, F-150, F-250, F-350 and Ranger trucks and SUVs, each limited to its own model years, and it mounts at the front.
A lifted Ford needs the drag link end moved down to reduce link angle, and a drop arm does that. The FD400 provides steering correction from the front position.
The long list includes both full-size and compact Fords, so check the year for your model.
Ford models on this list span two decades, so check the year of your Bronco, Explorer or Ranger against the list.
Key features
- 4 inch drop pitman arm
- Steering correction
- Power steering
- Front position
- Covers many Ford trucks and SUVs
Checking the steering after install
A drop pitman arm works on the steering box output, so the fit between the arm and the box shaft matters. Use a proper puller when removing the old arm, since tapping the shaft can damage the box. Center the steering before tightening the nut, and confirm that the arm clears the frame and linkage through full turns.
Trucks of this era often show wear in the steering box, drag link and tie rod ends, and those parts should be inspected before a drop arm goes in. After the arm is fitted, have the toe and caster checked, because the new geometry can change alignment. Report any unusual wander or shake on the road and address it before long trips.
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | FD400 |
| UPC | 614901110036 |
| Product type | Drop pitman arm |
| Amount of drop | 4 inches |
| Position | Front |
| Steering type | Power steering |
| Fit type | Direct fit |
Vehicle fitment
The manufacturer fitment list for the Pro Comp Suspension FD400 includes: 1980–1996 Ford Bronco (Custom, Eddie Bauer, Ranger XLT, XL, XLS, XLT, XLT Lariat, XLT Nite, XLT Sport); 1984–1990 Ford Bronco II (Base, Eddie Bauer, XL, XL Sport, XLS, XLT, XLT Plus); 1991–1997 Ford Explorer (Eddie Bauer, Expedition, Limited, XL, XLT); 1991–1997 Ford Explorer Sport; 1980–1983 Ford F-100 (Base, Custom, Ranger, Ranger Lariat, Ranger XLT, XL, XLS, XLT Lariat); 1980–1998 Ford F-150 (Base, Custom, Eddie Bauer, Lariat, Ranger, Ranger Lariat, Ranger XLT, Special, XL, XLS, XLT, XLT Lariat); 1980–1998 Ford F-250 (Base, Custom, Eddie Bauer, Lariat, Ranger, Ranger Lariat, Ranger XLT, Special, XL, XLS, XLT, XLT Lariat); 1997 Ford F-250 HD (XL, XLT); 1980–1997 Ford F-350 (Base, Custom, Eddie Bauer, Ranger, Ranger Lariat, Ranger XLT, Special, XL, XLS, XLT, XLT Lariat); 1983–1997 Ford Ranger (Base, Custom, GT, S, S Plus, STX, Splash, Sport, XL, XL Sport, XLS, XLT).
Pro Comp lists specific years, such as the Bronco for 1980-1996 and the Ranger for 1983-1997. Super Duty trucks and Dodge Ram trucks are not covered. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The arm comes off the steering box shaft with a puller. After installing a drop arm, check steering geometry and clearance.
What’s included
- One pitman arm, part number FD400











