Overview
The Skyjacker JA552 is a drop pitman arm for steering systems on vehicles with a 2 inch lift, part number JA552. It drops the steering linkage 2 inches and is designed to help correct steering geometry and reduce bump steer.
It is a direct fit for power steering systems. It suits lifted vehicles that need a pitman arm matched to a 2 inch lift.
Key features
- 2 inches of drop
- Designed for a 2 inch lift height
- Direct fit for power steering
- Carries a limited lifetime warranty.
Choosing a drop pitman arm
A drop pitman arm is one of several parts that set steering geometry on a lifted truck. Its drop should match the height of the lift, because a mismatch changes how the drag link sits and how the steering responds over bumps. Think about the full steering setup, including the drag link, tie rods and any track bar, before deciding which pieces to replace.
Lifts often bring out wear in joints that were already aging. Check ball joints, tie rod ends and the drag link for play when the arm is replaced, since loose joints can undo the benefit of correct geometry. Keeping the steering box and mounting bolts tight also helps the arm hold its position.
- Replace worn tie rod ends with the arm
- Check the drag link for play
- Recheck bolts after the first drives
Specifications
| Brand | Skyjacker |
|---|---|
| Part number | JA552 |
| UPC | 803696144313 |
| Type | Drop pitman arm |
| Amount of drop | 2 inches |
| Lift height | 2 in. |
| Steering | Power steering (direct fit) |
| Warranty | Limited lifetime |
Vehicle fitment
No specific years, makes or models are identified for the JA552. Check fit against your vehicle’s year, model and trim before buying.
Confirm your vehicle’s year, model and trim before ordering.
What’s included
Review the parts you receive against your installation before starting work.








