Overview
The Fabtech FTS23124 is a multiple front shock system with two DLSS reservoir shocks, made for the 2013–2017 Ram 3500 and the 2014–2017 Ram 2500. It is designed for a 5 in. lift.
The mounts are 1.5 in. OD tubular brackets that bolt on without welding. The design increases dampening capacity, and installation takes 4 hours.
Key features
- Two DLSS reservoir shocks included
- Bolt-on installation with no weld required
- 1.5 in. OD tubular brackets
- Designed for a 5 in. lift
- Built to increase dampening capacity.
Lift height and suspension match
Front suspension height influences how a shock system works, since shock length and mounting angle change with ride height. A system designed around a specific lift keeps the shocks in their intended range of travel. Changing lift height later may call for a different shock setup, so plan suspension upgrades together.
Reservoir shocks handle heat better than standard units, which helps during long grades and towing. Inspect the reservoir hoses and mounting clamps periodically for chafing, and make sure the shocks clear the frame and steering components after the first drive. Keep tire size and wheel offset in mind as well, since they affect how the front end moves over bumps.
- Check hose clearance after the first drive
- Get an alignment after a lift
Specifications
| Brand | Fabtech |
|---|---|
| Part number | FTS23124 |
| UPC | 674866098251 |
| Position | Front |
| Fitment type | Direct fit |
| Lift height | For 5 in. Lift |
| Included shocks | 2 DLSS reservoir shocks |
| Tube size | 1.5 in. OD tubular |
| Install time | 4 hours |
Vehicle fitment
It fits 2014–2017 Ram 2500 trucks (Big Horn, Laramie, Laramie Limited, Laramie Longhorn, Limited, Lone Star, Outdoorsman, Power Wagon, SLT and Tradesman trims) and 2013–2017 Ram 3500 trucks (Big Horn, Laramie, Laramie Limited, Laramie Longhorn, Limited, Lone Star, SLT, ST and Tradesman trims).
Ram 1500 models and 2013 Ram 2500 models are not on this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
This system is matched to a 5 in. lift. The installation is bolt-on with no welding and takes 4 hours.
What’s included
The kit includes two DLSS reservoir shocks along with the multiple front shock system components.









