Overview
The Rock Krawler RK04903 is a bare steel front coil over bracket for 2007–2017 Jeep Wrangler (JK) 2-door and 4-door models. It is built from plate steel, laser cut and precision welded, and Rock Krawler describes its construction as heavy and intended to last.
The listed lift range is 1.5 to 5.5 inches. Rock Krawler says its brackets and tabs are made to a high standard, and this part is made in the U.S.A.
Key features
- Plate steel construction
- Laser cut and precision welded
- Bare steel finish
- Listed lift range of 1.5 to 5.5 inches
- Covers 2-door and 4-door Wrangler JK models
- Made in the U.S.A.
Alignment after a lift
Coil over mounts move the shock and spring location, which changes suspension geometry. Lift height affects pinion angle, caster, and driveline angles, so the setup should be checked once the brackets are mounted. Brake lines, sway bar links and steering components can also come under new stress, so look at them after the install.
Plate steel brackets carry heavy loads through the welds and mounting holes, so inspect the welds and bolt holes regularly. Bare steel can surface rust quickly where road salt and mud collect. Re-torque the mounting hardware after the first few drives and recheck alignment after any change in lift height.
- Check driveline angles after mounting
- Inspect welds and mounting holes for cracks
- Recheck alignment after any lift change
Specifications
| Brand | Rock Krawler |
|---|---|
| Part number | RK04903 |
| UPC | 700007685701 |
| Position | Front |
| Construction | Plate steel |
| Finish | Bare steel |
| Lift range | 1.5 to 5.5 in. |
| Body style | 2-door and 4-door |
| Origin | Made in the U.S.A. |
Vehicle fitment
It fits 2007–2017 Jeep Wrangler JK in 70th Anniversary, 75th Anniversary, Rubicon, Sahara, Sport, Sport S and X trims, including the Unlimited versions of those trims.
The Wrangler TJ, LJ and the newer JL generation, as well as Cherokee and Grand Cherokee models, are not on this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The lift range is 1.5 to 5.5 inches, so once the brackets are mounted, check alignment and driveline angles at the lift height you run. Changing shock mount height changes suspension geometry.
What’s included
The brackets are the item supplied. Coil over shocks and coil springs are needed to complete the setup and must be sourced separately.
Not included: coil over shocks and coil springs, which these brackets mount.









