Overview
The Trail Gear 140056-1-KIT is a differential stud eliminator kit that replaces factory axle housing studs with Allen head bolts. It addresses oil leaking from the center of the axle housing when stock studs pull loose.
The stock studs can pull loose after trail use. The replacement bolts are designed to resist pulling out, and the kit includes 10 high strength studs, nuts, washers and a tube of Ultra Gray Silicon gasket material.
Key features
- Replaces loose factory studs with Allen head bolts
- Allen head bolts are designed to resist pulling out, unlike stock studs.
- Kit includes 10 high strength studs, nuts and washers
- Ultra Gray Silicon gasket material included
- Avoids tapping and drilling out the old studs.
Before you swap studs
Differential stud eliminators replace factory cover studs with bolts that have a recessed socket. The housing face is where oil leaks show up when studs back out, so cleaning the mating surfaces and checking for cracks before installing is a good habit. Tighten new hardware in a crisscross pattern to draw the cover down evenly.
Gasket material matters as much as the fasteners. Remove old gasket residue, keep the surfaces dry, and let the sealant cure as its own instructions describe before filling the housing. Recheck the cover after the first few drives and retighten the fasteners if any seepage appears.
- Clean the cover and housing faces fully
- Tighten fasteners in a crisscross pattern
- Allow the gasket to cure before filling
- Recheck fasteners after the first drives
Specifications
| Brand | Trail Gear |
|---|---|
| Part number | 140056-1-KIT |
| UPC | 70000621462 |
| Purpose | Differential stud eliminator for axle housing studs |
| Kit contents | 10 high strength studs, nuts, washers, Ultra Gray Silicon gasket material |
| Fitment | Universal fit listed |
Vehicle fitment
No vehicle is named. Trail Gear lists universal fit, but the kit targets axle housing studs, so match it to your housing.
Check that your axle housing has the stock studs this kit replaces before you choose it. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Sealing with the included gasket material is part of the job. The old studs are not tapped or drilled out.
What’s included
Included: 10 high strength studs, nuts, washers and a tube of Ultra Gray Silicon gasket material.










