Overview
The Crown Automotive Dana 35 3.31 down differential case, part number 43219, is a replacement differential case for Dana 35 axles with a 3.31 down ratio. No vehicle, year or chassis code is named, so confirm the axle in your vehicle before you buy.
The differential case is the housing that carries the ring gear and the differential gears inside the axle. Crown Automotive has supplied replacement parts for Jeep vehicles for more than 50 years.
Key features
- Built for a Dana 35 axle
- Listed with a 3.31 down ratio
- Replacement differential case from Crown Automotive
- Crown Automotive part number 43219
Gearing and rebuild planning
A differential case is more than a housing. It holds the ring gear and carries the spider gears, so its condition affects how smoothly the axle runs under load. Before replacing it, look for cracks around the bearing bores, heavy scoring on the bearing surfaces, and any sign that the ring gear has shifted on its flange.
Because the case sets the ring gear position, a replacement is usually paired with careful pattern and backlash checks after installation. If the ring and pinion are being reset, plan for measured setup rather than assuming the old settings will carry over.
- Inspect bearing bores for cracks or wear
- Check ring gear bolts and flange condition
- Plan for backlash and pattern checks after assembly
Specifications
| Brand | Crown Automotive |
|---|---|
| Part number | 43219 |
| UPC | 848399000221 |
| Component | Differential case |
| Axle type | Dana 35 |
| Ratio | 3.31 down |
Vehicle fitment
No vehicle is named for this case. The title identifies a Dana 35 axle, so it is axle-specific and not a universal part, even though it is tagged universal fit.
Confirm the axle and gear ratio against your vehicle before ordering. A case for a different axle or ratio will not match a Dana 35 with other gearing, so check the ratio on your current housing first.
A case for a different axle or ratio will not match a Dana 35 with other gearing. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
A differential case installs inside the axle housing, which means the carrier comes out, and the ring and pinion setup must be checked afterward. Professional installation is recommended. Lift and block the vehicle securely before working underneath it.
What’s included
Check the package contents, including any bearings, ring gear or fasteners, against your installation before starting.







