Overview
The Trail Gear 111281-KIT is an 18 in Rock Assault axle limit strap that uses six layers of nylon webbing to restrain shock travel. It is meant for trail driving where a shock could overextend and break.
The design uses six layers of nylon webbing with anti-abrasion clips and zinc-plated buckles. The strap is universal fit and sold individually, so match the length to the shock.
Compare the table entries for length, webbing and buckles against the shock you run before settling on the 18 in size.
Key features
- Six layers of nylon webbing, designed for minimal stretch.
- 4130 heat-treated Chromoly Steel buckles with zinc plating.
- Anti-abrasion clips in every buckle to slow wear.
- 9,000 lb test rating for the nylon strap material.
- 1/2 inch mounting holes; length accurate to +/- 1/4 inch.
Trail use and shock travel
Shock travel is what a limit strap controls, and on rocky trail a shock can reach full extension quickly when a wheel drops into a gap. Restraining that extension protects the shock body and its mounts. Because the strap sits between the shock and the axle, its clips and buckles see rubbing, so their condition is worth watching.
Pairing the strap with suspension and tires sized for trail use gives the setup a better match. A larger tire or lift changes the shock’s extended length, so the strap may need to be re-measured. Keep spare hardware on hand and check the shock mounting points at the same time you inspect the strap.
- Check buckles for cracks at each service
- Look for abrasion where the strap contacts the shock
- Re-measure after changing tire size or lift
- Keep spare mounting hardware on hand
Specifications
| Brand | Trail Gear |
|---|---|
| Part number | 111281-KIT |
| UPC | 70000640910 |
| Length | 18 in |
| Layers | Six |
| Webbing | Nylon |
| Test rating | 9,000 lb test |
| Buckle material | 4130 heat-treated Chromoly Steel |
| Buckle finish | Zinc-plated |
| Mounting holes | 1/2 inch |
| Length tolerance | +/- 1/4 inch |
Vehicle fitment
It fits universally, so no year, make, model or trim is tied to it. Decide by your shock’s length rather than your vehicle name.
Installation notes
The strap should sit about one inch shorter than the shock so the shock cannot reach its full extension. Check that gap on the shock you actually run.
What’s included
The strap is sold individually.
Not included: Shocks and mounting bolts are not part of this strap.




