Select your vehicle
-13%

Trail Gear 10 Inch Rock Assault Axle Limit Strap – 111273-KIT

Trail Gear

Shop Trail Gear Limiting Straps on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Trail Gear 10 in Rock Assault axle limit strap, part 111273-KIT
  • Six-layer nylon webbing rated 9,000 lb test
  • 4130 heat-treated Chromoly Steel buckles, zinc-plated
  • Universal fit, sold individually

Description

Overview

Trail Gear’s 10 in Rock Assault axle limit strap, part 111273-KIT, is a six-layer nylon limit strap designed to keep a shock from overextending. Overextension can break the shock when the axle moves through rough ground.

The strap is universal fit, so it is chosen by shock length rather than vehicle model. It has minimal stretch and is sold individually.

Owners choosing between the 10 in size and other lengths can use the tolerance and mounting details in the table to confirm the right strap.

Key features

  • Six-layer nylon webbing that stretches very little under load.
  • Zinc-plated 4130 heat-treated Chromoly Steel buckles.
  • Abrasion clips in each buckle to reduce wear points.
  • 9,000 lb test rating on the nylon strap.
  • Length measured from the center of the 1/2 inch mounting holes.

Matching length to the shock

Limit strap length is set by the shock, not the vehicle, so the first step is measuring the shock’s extended length. A strap set a little under that length keeps the shock from reaching the end of its travel, which is the job the strap was made for.

Consider how the strap will sit at both ends of suspension travel. Too much slack wastes protection, and a strap pulled tight at ride height can stress the mounts. Recheck the length if you change shocks, lift height or tire size, since those change how far the shock travels.

  • Measure the shock at full extension
  • Check clearance at both ends of travel
  • Recheck length after any suspension change
  • Replace a stretched strap rather than reuse it

Specifications

Brand Trail Gear
Part number 111273-KIT
UPC 70000640906
Length 10 in
Layers Six
Webbing Nylon
Test rating 9,000 lb test
Buckle material 4130 heat-treated Chromoly Steel
Buckle finish Zinc-plated
Mounting holes 1/2 inch
Length tolerance +/- 1/4 inch

Vehicle fitment

Trail Gear marks this strap Universal Fit, so it is not assigned to a particular year, make or model. Confirm the strap length against the shock rather than the vehicle name.

Installation notes

A strap roughly one inch shorter than the shock keeps the shock from reaching full extension. Take that gap into account before choosing a length.

What’s included

The 10 in strap is sold individually.

Not included: Bolts and shocks are not part of this kit, so have them ready before installation.

SKU: TGI111273-KIT Category:

Specification

Shipping weight 0.75 lbs
Package dimensions 7.50 × 7.50 × 3.50 in
brands

Questions & Answers

Will the 10 in Rock Assault strap fit my vehicle?

It is universal fit, so no year, make or model is assigned. Whether it suits your setup depends on your shock, since the strap should sit roughly an inch shorter than the shock.

Why choose 10 in over another length?

Length should match the shock. A strap set roughly an inch under the shock keeps the shock from fully extending. The 10 in size is the strap's length.

What mounting holes does this strap use?

The strap uses 1/2 inch mounting holes, and Trail Gear measures length from their center. The stated length tolerance is +/- 1/4 inch.

What is the strap's strength rating?

The nylon strap material is rated at 9,000 lb test. It is built with six layers of nylon webbing and minimal stretch, and each strap is sold individually.

Should the strap be replaced after a hard hit?

Inspect it first. Look for cuts, flattened webbing, stiffness, and buckle damage. If any of these show up, replace the strap, because damaged webbing may not hold the shock at the intended limit.

Can the buckles be cleaned after mud runs?

Yes. Rinse the buckles with fresh water after muddy trips, dry them, and check the zinc plating for scratches. Keep the clips free of grit so they continue to reduce wear on the buckles.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop Trail Gear Limiting Straps on Amazon