Overview
Part 111291-KIT is Trail Gear’s 28 in Rock Assault axle limit strap, made from six layers of nylon webbing. It limits shock extension to protect the shock from full-extension damage on uneven ground.
The strap uses six layers of nylon webbing with anti-abrasion clips and zinc-plated 4130 Chromoly Steel buckles. It is universal fit and sold individually, so the shock sets the choice.
Trail Gear’s figures for the 28 in size, including the 1/2 inch mounting holes and +/- 1/4 inch tolerance, appear in the table below.
Key features
- Six-layer nylon webbing with minimal stretch.
- 4130 heat-treated Chromoly Steel buckles, zinc-plated for corrosion resistance.
- Clips that resist abrasion, fitted inside each buckle.
- Nylon rated at 9,000 lb test.
- Half-inch mounting holes; length accurate to +/- 1/4 inch.
Choosing the right limit setup
The limit strap is one part of the shock setup, so the choice should consider the shock, the axle and the mounting points together. The strap works only when its length matches the shock’s extended measurement. Because it is universal fit, the buyer chooses the length, which means measuring carefully before buying.
Other parts can change what the strap does. Lift kits, larger tires and new shocks alter the shock’s extended length, and the strap may need re-measuring afterward. Check the shock mounts and axle brackets for wear, since a loose mount can move the shock and change how the strap loads.
- Measure the shock before ordering
- Re-measure after lifts or tire changes
- Inspect shock mounts for looseness
- Replace worn buckles and clips
Specifications
| Brand | Trail Gear |
|---|---|
| Part number | 111291-KIT |
| UPC | 70000640915 |
| Length | 28 in |
| Layers | Six |
| Webbing | Nylon |
| Test rating | 9,000 lb test |
| Buckle material | 4130 heat-treated Chromoly Steel |
| Buckle finish | Zinc-plated |
| Mounting holes | 1/2 inch |
| Length tolerance | +/- 1/4 inch |
Vehicle fitment
It is universal fit, so no vehicle year, make, model or trim is attached. Fit depends on the shock’s length.
Installation notes
Trail Gear’s sizing note is about one inch less than the shock, which guards against full extension. Compare the 28 in strap with your shock before you pick it.
What’s included
The 28 in strap is sold individually.
Not included: Shocks and mounting hardware are not part of this strap.




