Overview
The Smittybilt 76920 is a transfer case skid plate made from 3/16-inch steel with a black powder coat finish. It is made for 2-door and 4-door Jeep models.
The plate is laser cut to fit and mounts to the frame using factory hardware. It is a bolt-on part with no drilling required, and the thick steel is built to take hard hits on the trail.
Key features
- 3/16-inch steel for transfer case protection
- Precision laser cut for fit
- Mounts to the frame with factory hardware
- No drilling or cutting required
- Black powder coat finish
Transfer case protection
A transfer case skid plate sits under the drivetrain where rocks and stumps can strike first. Its job is to absorb a hit so the transfer case housing and its seals are not damaged. A plate that is bolted securely to the frame spreads the load across a wider area, which helps it resist bending.
Skid plates take a beating, so inspect the plate and its bolts after off-road trips. Look for dents that cut into the coating, cracks at the mounting points and bolts that have loosened. Touching up scratches in the black powder coat slows rust and keeps the plate in good condition for longer.
- Check frame bolts after rough trails
- Touch up chips in the finish
- Look for cracks around mounting points
Specifications
| Brand | Smittybilt |
|---|---|
| Part number | 76920 |
| UPC | 631410128352 |
| Type | Transfer case skid plate |
| Material | 3/16-inch steel |
| Finish | Black powder coat |
| Installation type | Bolt-on, no cutting or drilling |
| Mounting | Frame, using factory hardware |
| Body style | 2-door and 4-door models |
Vehicle fitment
It fits 2-door and 4-door Jeep models. Verify fit against your Jeep’s year, model and trim before buying.
Because no years are given, confirm your vehicle’s year, model and trim before ordering.
Installation notes
The plate is a bolt-on installation with no drilling or cutting, and the mounting hardware comes with the plate.
What’s included
The skid plate with hardware for a bolt-on installation.





















