Overview
The Titan Tanks 8020011 is a 40 gallon extra capacity after axle fuel tank made of polyethylene. After axle means the tank sits behind the rear axle, and it is a direct fit design with extended capacity.
The larger tank is intended for trips where the nearest fuel station is 400 miles away. No make, model or model year is tied to it, so confirm fit before ordering.
Key features
- 40 gallon extended capacity
- After axle design for placement behind the rear axle
- Polyethylene construction
- Direct fit design
Routing and safety for rear tanks
A rear mounted tank changes how the fuel system is laid out, so the lines, vent and filler routing need a plan before anything is disconnected. Keep fuel lines clear of the exhaust, moving suspension parts and sharp edges, and use proper clamps and protective sleeves where the line passes through a body opening. Fuel vapor is heavier than air, so a vent that drains low is part of safe placement.
Extended capacity adds weight, so check that the mounting points can carry a full tank and that the suspension is in good condition. Inspect straps and mounting hardware after the first few trips, and recheck the fuel line fittings for seepage. Keep sparks and open flame away from the work area while the system is opened, and work in a ventilated space.
- Route lines away from heat and moving parts
- Check mounts after the first trips
- Use fresh clamps and vent hose
Specifications
| Brand | Titan Tanks |
|---|---|
| Part number | 8020011 |
| UPC | 848135001147 |
| Capacity | 40 gallon (extended) |
| Material | Polyethylene |
| Placement | After axle |
| Fit type | Direct fit |
Vehicle fitment
No make, model or model year is named for this tank, so fitment is not confirmed. Compare the after axle placement with your vehicle’s existing tank position and fuel system layout before ordering.
A different tank location or axle layout is not covered by this tank’s design. Confirm fit for your vehicle’s year, model and trim before ordering.
Installation notes
This tank changes the fuel line, vent and mounting layout compared with a stock tank, so plan those routes before disconnecting anything. Relieve fuel system pressure and disconnect the battery before starting, and keep open flame away from the work area.
What’s included
Check the package contents for straps, bushings, vent hoses and a sending unit before installing. Plan separate fuel line and mounting parts as needed.








