Overview
The Titan Tanks 50 Gallon Extra Capacity Fuel Tank and Shield, part number 7020211S, is a midship replacement fuel tank with a custom shield for 2011–2016 Ford F-250 and F-350 Super Duty diesel pickups with Crew Cabs and 6 ft beds. It fits those models directly.
The tank is made of military grade cross-linked polyethylene and looks close to the original tank. It hangs approximately 1 inch below the bottom of the shield bracket.
Key features
- Extra capacity midship design
- Military grade cross-linked polyethylene
- Includes an extra heavy duty fuel tank custom shield
- Cantilevered front support
- Low fuel trap design
- Hangs approximately 1 inch below the bottom of the shield bracket
Shield and bracket clearance
A custom shield changes how a tank sits under the cab, so fitting it correctly depends on checking the shield bracket against the frame and the cantilevered front support. Set the tank in place before fully tightening any strap, and confirm the shield clears the frame rails, crossmembers and the exhaust. Adjust the mounting position so the tank is level and does not rub on the shield during a turn.
Super Duty trucks carry heavy loads and tow often, so the shield and tank see more vibration than lighter trucks. Inspect the bracket welds and fasteners after the first few trips, and look for scuffing on the shield that would show movement. If the tank is removed later for service, fit new bushings rather than reusing old ones to keep the mounting solid.
Specifications
| Brand | Titan Tanks |
|---|---|
| Part number | 7020211S |
| UPC | 848135000256 |
| Capacity | 50 gallons |
| Material | Military grade cross-linked polyethylene |
| Bed length | 6 ft |
| Included shield | Extra heavy duty fuel tank custom shield |
Vehicle fitment
It fits 2011–2016 Ford F-250 and F-350 Super Duty models in King Ranch, Lariat, Platinum, XL and XLT trims.
The list does not include 2017 and later Super Duty trucks or F-150 models. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The custom shield comes with the tank, and the cantilevered front support and zinc-coated steel strap set are the mounting parts. Check that the tank sits about 1 inch below the shield bracket and clears the frame before tightening anything.
What’s included
Extra heavy duty fuel tank custom shield, zinc-coated steel mounting strap set, cantilevered front support, extruded rubber mounting bushings and accessories.














