Overview
The TIS Offroad 544MB is a 20×12-inch black and machined aluminum directional wheel, part number TIS544MB-2128144. Its listed bolt pattern is 8 on 6.5 and its center bore is 125.
The machined face contrasts with the black finish, and the 12-inch width sets the wheel’s presence on the vehicle. The offset of -44 and backspacing of 4.77 should be measured against your fender clearance before mounting.
Key features
- Black with machined face finish
- 8 on 6.5 bolt pattern
- 20-inch diameter and 12-inch width
- Directional style in aluminum construction
Machined faces and daily use
A machined face is cut so the bare aluminum shows through the black finish. That bright cut reads well against the dark surface, but the exposed metal is more open to scuffs, brake dust and road grime than a fully painted face. Cleaning gently and avoiding abrasive pads keeps the contrast looking intentional rather than worn.
Mounting a wheel with a machined face also calls for extra care. Use a soft mounting head on the tire machine and keep bead lubricant off the machined areas. Check the face for marks before the tire goes on, since a scratch made during mounting can be hard to see once the tire covers the edge.
Over time, the machined areas can dull if road salt and brake dust sit on them. Rinse the wheels after muddy or salty runs, and inspect the lip for small chips after trail use. Retorque the lug nuts after the first drives, and recheck them after any tire service.
- Soft mounting head on tire machines
- Keep bead lubricant off machined areas
- Rinse after salty or muddy runs
- Inspect the lip for chips
Specifications
| Brand | TIS Offroad |
|---|---|
| Part number | TIS544MB-2128144 |
| Series | 544MB |
| Diameter | 20 inches |
| Width | 12 inches |
| Offset | -44 |
| Center bore | 125 |
| Backspacing | 4.77 |
| Bolt pattern | 8 on 6.5 |
| Style | Directional |
| Finish | Black/Machined |
| Construction | Aluminum |
Vehicle fitment
No vehicle is named for this wheel. The Universal Fit entry in the fitment field is not a vehicle, so the bolt pattern and center bore need matching by hand.
Confirm fit for your vehicle’s year, model and trim before ordering, and match the 8 on 6.5 pattern and 125 center bore to your hub.
Installation notes
Mount the directional wheel with its rotation matching the side marked for it. Check the machined face for scratches before mounting, since bare metal finishes show marks more easily.
What’s included
This is one wheel. Caps, lug nuts and hardware are not included, so source them separately.
Not included: tires are not part of the stated contents.









