Overview
The TIS Offroad 544BM is a 24 inch by 12 inch aluminum directional wheel with a black milled finish, part number TIS544BM-2426844. Its primary bolt pattern is 6 on 5.5. It is sold as universal fit, so the bolt pattern, offset and center bore must be checked against your hub before mounting.
The 544BM suits owners who want a bold, milled look on an off-road truck or SUV. The 24 inch diameter and 12 inch width are the figures to match against your tire choice. Its second bolt pattern is 6 on 135, which should be confirmed separately against your hub.
Key features
- Aluminum construction in a 24 inch diameter and 12 inch width
- Black milled finish with a directional style
- Primary bolt pattern of 6 on 5.5, with a second listed pattern of 6 on 135
- Offset of -44 and center bore of 108
- Backspacing of 4.77, which sets how the wheel sits relative to the hub face
Matching a 24-inch wheel to tires
A 24-inch wheel leaves little room for a tire with a tall sidewall, so most builds pair this size with a low-profile or flotation-style tire. Tire choice changes overall diameter, load rating and how the tire flexes on rocks. Compare the tire’s overall diameter with your current setup before buying, so the speedometer and gearing stay close to what you expect.
The 12 inch width gives a wide tread face, which helps grip on loose surfaces but can rub on fenders when steering. Offset and backspacing decide how far the wheel sits inside or outside the fender. A test fit with the tire mounted shows the real clearance, including full steering lock and suspension compression.
A wheel this size also loads the hub and bearings more than a stock wheel. Inspect the lug nuts and wheel studs after the first drives, and check for vibration at highway speed. Keep the tire pressure set for your load and terrain.
- Overall tire diameter compared with stock
- Tire load rating for the wheel
- Fender and steering clearance
- Lug nut torque after the first drives
Specifications
| Brand | TIS Offroad |
|---|---|
| Part number | TIS544BM-2426844 |
| Wheel diameter | 24 inches |
| Wheel width | 12 inches |
| Offset | -44 |
| Center bore | 108 |
| Backspacing | 4.77 |
| Bolt pattern | 6 on 5.5 |
| Bolt pattern #2 | 6 on 135 |
| Style | Directional |
| Finish | Black/Milled |
| Construction | Aluminum |
| Fitment | Universal Fit |
Vehicle fitment
The wheel is sold as universal fit, so no particular year, make, model or trim is tied to it. Bolt pattern, offset, center bore and backspacing decide whether it clears your hub, brakes and fenders.
Confirm your vehicle’s bolt pattern, center bore and offset against the specifications above before ordering. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
A 6 on 5.5 pattern must match the hub’s stud count and spacing, and the second 6 on 135 pattern is a separate listed spec that should not be assumed to fit your vehicle. The -44 offset and 4.77 backspacing change how far the wheel sits in the wheel well, so check clearance with the tire size you plan to run. Have the wheel and tire assembly mounted and balanced by a qualified tire shop.
What’s included
The wheel is sold alone. Tires, lug nuts and center caps are not included, so plan to source them separately.
Not included: Tires, lug nuts and center caps need to be sourced separately to complete the wheel.









