Overview
This FUEL Off-Road D706 Siege is a 22×10 matte black split spoke aluminum wheel with a 6 on 5.5 bolt pattern. Its part number is MHTD70622008447.
The 106 center bore, -18 offset and 6.2 backspacing are the numbers that govern mounting. No vehicle is named, and FUEL uses the universal fit label, so compare these figures to your hub first.
Key features
- Matte black split spoke styling
- 22-inch diameter and 10-inch width
- 6 on 5.5 bolt pattern with a 106 center bore
- Offset of -18 and backspacing of 6.2
Spacers and wheel studs
Wheel studs carry the clamp load that holds a wheel against the hub, so their condition matters as much as the wheel itself. Threads should be clean and undamaged, and the stud should project far enough for the nut to seat fully. Corroded or stretched studs can loosen under vibration, so inspect them when the wheel is off.
A spacer or hub adapter changes the mounting position and can alter clearance to brakes and fenders. Adapters that are thicker than the wheel’s offset calls for put more stress on studs and bearings. Any spacer should be chosen with the bolt pattern, center bore and stud length in mind, and the setup should be rechecked after installation.
- Inspect threads for damage when wheels come off
- Confirm stud projection before using a spacer
- Recheck torque after the first short drive
Specifications
| Brand | FUEL Off-Road |
|---|---|
| Part number | MHTD70622008447 |
| Model | D706 Siege |
| Wheel diameter | 22 inches |
| Wheel width | 10 inches |
| Bolt pattern | 6 on 5.5 |
| Center bore | 106 |
| Offset | -18 |
| Backspacing | 6.2 |
| Style | Split spoke |
| Finish | Matte black |
| Construction | Aluminum |
| Fitment | Universal fit |
Vehicle fitment
Universal fit is the only fitment statement for this wheel, with no year, make or model named. The bolt pattern, center bore and offset are the checks to make.
Confirm your vehicle’s year, model and trim before ordering. A 6 on 5.5 pattern is a specific match, so verify it before buying.
Installation notes
A negative offset of -18 pushes the mounting face outward, so check fender and caliper clearance before installing.
What’s included
Center caps, lug nuts and tires must be sourced separately for this wheel.











