Overview
The Skyjacker NG114L-14 is a rebuildable rod end kit for a 1 1/4 in. heim joint, used as a joint rebuild kit. It includes the heim joint, pivot plus inserts and jam nuts to complete the installation. The joint is serviceable, and the kit replaces older style heim joints.
It is a universal fit kit. Thread direction and type should be confirmed before ordering.
Key features
- Rebuildable rod end design
- 1 1/4 in. heim joint
- Pivot plus inserts and jam nuts
- Serviceable joint
- Universal fit listed
Rebuilding a rod end
Rebuilding a rod end means removing the worn parts from the housing and fitting new ones in the same bore. The process usually starts with cleaning the housing, then pressing in the new pivot and inserts, and finishing with the jam nuts set to the right torque. A clean, square fit matters, because a cocked insert wears quickly once the link is loaded again.
Before starting, inspect the housing for cracks, bends and scoring. A rebuild only makes sense when the housing is sound and the wear is in the moving parts. If the housing is damaged, the whole joint should be replaced. Keep the old parts until the new joint is installed so you can compare fit and thread.
- Clean the housing bore before pressing in parts
- Use the correct press or tool to avoid damage
- Set jam nut torque and check for free movement
- Replace parts that show wear or cracks
Specifications
| Brand | Skyjacker |
|---|---|
| Part number | NG114L-14 |
| Kit type | Joint rebuild kit |
| Heim joint size | 1 1/4 in. |
| Maintenance | Serviceable |
Vehicle fitment
Skyjacker gives universal fit only for this kit. No vehicle years, makes or models are named, so the kit is not matched to a specific vehicle.
Make sure the fit suits your vehicle’s year, model and trim before buying. Check the joint size against your axle or link mounts before installing.
Installation notes
Rebuilding the joint uses the included pivot, inserts and jam nuts, so compare the kit contents with the joint you are replacing before starting work.
What’s included
Heim joint, pivot plus inserts, and jam nuts.









