Overview
The TeraFlex 4116260 is a large rod end, a forged finished joint designed to allow some misalignment while the suspension articulates.
A specially designed urethane bushing limits excess movement, which TeraFlex says keeps control and handling steady at highway speeds. The joint is serviceable and uses a right hand thread.
Key features
- Allows some misalignment during articulation
- Urethane bushing restricts excess movement
- Aimed at steady control and handling at highway speeds
- Serviceable finished joint with right hand thread
Inspecting a urethane rod end
Urethane bushings handle movement differently from rubber or greased joints. They resist excess motion, which helps the suspension feel controlled, but they can take a set over time and lose their grip on the stud. Look for cracks, tears or flattened sections on the bushing during routine checks, especially after rocky trail use where the arm has been twisted.
Routine inspection should also cover the arm mounts, the jam nut and the tightness of the joint in its housing. A joint that has play, clunks or moves unevenly through its travel is due for service. When rebuilding a serviceable joint, use the grease or replacement parts suited to that joint and keep the thread clean before reassembly. Recheck alignment after the first few runs, since a changed length can shift handling.
- Check the bushing for cracks or flattened areas
- Inspect the jam nut and thread condition
- Look for play or uneven movement through travel
Specifications
| Brand | TeraFlex |
|---|---|
| Part number | 4116260 |
| UPC | 843885025764 |
| Joint details | Finished joint |
| Type | Forged |
| Bushing material | Urethane |
| Maintenance | Serviceable |
| Thread direction | Right |
| Fitment | Universal fit |
Vehicle fitment
No vehicle, year range or chassis code is given for the 4116260, so it is not matched to a specific model. The manufacturer marks it universal fit, which makes thread direction and arm compatibility the key checks.
Compare thread direction and arm mounting with your control arm before fitting. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The joint is serviceable, so it can be maintained rather than discarded. Thread it in the right hand direction, and confirm it is fully seated before loading the arm.
What’s included
Have a jam nut and mounting hardware on hand, and confirm they match the arm before assembly.







