Overview
The TeraFlex 4520012 is a large rubber end, a forged finished joint with a rubber bushing for quiet street driving.
The rubber bushing is designed to dampen noise and vibration for quiet street driving. The end can serve as a replacement for a control arm that uses a 1-1/4 inch x 12 tpi heim type rod end with a 9/16 inch bolt.
Key features
- Rubber bushing for a quiet street ride and reduced vibration
- Works as a replacement for a 1-1/4 inch x 12 tpi heim type rod end
- Uses a 9/16 inch bolt
- Right hand thread on a non-serviceable forged joint
Rubber bushings on street joints
Rubber bushings trade some control for comfort. They absorb vibration and quiet road noise better than firmer materials, which is why they suit daily driving. Rubber can soften and crack with age, heat and exposure, so inspect the bushing for splits, bulges or separation from its sleeve during routine checks.
Because this joint is non-serviceable, wear means replacing the whole end. Look for play, clunking or uneven steering feel, and replace the end before the arm is damaged. When choosing a rubber end, put the thread size, bolt diameter and right hand direction ahead of appearance. Check alignment after installation, and recheck the jam nut after the first few drives.
- Check the bushing for splits or bulges
- Watch for play or clunks over bumps
- Replace the whole end when worn
Specifications
| Brand | TeraFlex |
|---|---|
| Part number | 4520012 |
| UPC | 843885026075 |
| Joint details | Finished joint |
| Type | Forged |
| Bushing material | Rubber |
| Maintenance | Non-serviceable |
| Thread | 1-1/4 inch x 12 tpi, right hand |
| Bolt | 9/16 inch |
| Fitment | Universal fit |
Vehicle fitment
No vehicle is named for the 4520012. It is positioned as a replacement end for any control arm with the matching heim thread, so thread and bolt size decide compatibility rather than a model.
Confirm your vehicle’s year, model and trim before ordering, since the end is sized rather than tied to a model.
Installation notes
The joint is non-serviceable, so plan to replace the whole end rather than rebuild it. The right hand thread and 9/16 inch bolt must match the arm before the jam nut is tightened.
What’s included
Check the bolt and jam nut on hand against the arm before assembly, and make sure the 9/16 inch size matches.







