Overview
The TeraFlex 4116270 is a large rod end with a left hand thread, built as a forged finished joint with flex ends.
Its urethane bushing restricts excess movement, which TeraFlex says gives control and predictable handling at highway speeds. Because the thread runs left hand, check the direction on your control arm before threading the joint in.
Key features
- Left hand thread
- Urethane bushing restricts excess movement
- Flex ends allow misalignment during articulation
- Serviceable forged joint
Left hand threads explained
Left hand threads are used on some joints so that a rod end can be adjusted or locked without changing the direction the nut tightens. Because the thread runs opposite to the usual right hand direction, a left hand joint can be mistaken for a right hand one. Test the thread by hand before applying a wrench, and make sure the arm’s threaded bore has the same handedness.
When a left hand joint is paired with a right hand one on the same link, the adjustment length changes in opposite directions. Mark the starting position before loosening the jam nut so the setting can be restored. Before you hit the trail, check that the bushing is not pinched, the nut is locked, and the joint has full travel without binding.
- Test the thread by hand before using a wrench
- Mark the starting position before adjusting length
- Keep threads clean and free of grit
Specifications
| Brand | TeraFlex |
|---|---|
| Part number | 4116270 |
| UPC | 843885025771 |
| Joint details | Finished joint |
| Type | Forged |
| Bushing material | Urethane |
| Maintenance | Serviceable |
| Thread direction | Left |
| Fitment | Universal fit |
Vehicle fitment
The 4116270 is not tied to any vehicle, so no year, make or model applies. It is universal fit, and the left hand thread is the main compatibility check.
Compare the thread direction and mounting with your arm before fitting. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Thread the joint onto the arm in the left hand direction, then tighten the jam nut against the joint. Check that the joint moves freely without binding before loading the arm.
What’s included
Plan for a jam nut and any mounting hardware, and confirm they match the arm before assembly.







