Overview
The TeraFlex Dual Rate S/T swaybar kit, part number TER1753720, is a front sway bar system for 2007–2018 Jeep Wrangler (JK) two-door and four-door models. It is a manual disconnect that uses an engagement knob to change between a street position and a trail position.
In the street position the bar is engaged, which TeraFlex says gives a steadier drive on the highway. In the trail position the bar is disconnected, so the front axle can articulate and the tires keep contact with uneven ground. The kit has two torsion bars: one for heavy-duty highway handling and one tuned for off-road articulation.
Key features
- Dual rate design with two torsion bars
- Manual engagement knob for street and trail positions
- Street position for a steadier highway drive
- Trail position for articulation with balanced suspension travel
- Trail setting provides resistance to limit excessive body roll on side hills and off camber
- Forged construction
Choosing street or trail mode
Street mode keeps the sway bar engaged, which reduces body roll in corners and helps the truck track steadily at highway speed. Trail mode disconnects the bar so each front wheel can move independently over obstacles, keeping tires in contact with uneven ground. Switching between the two is a quick knob change, but the truck should be parked and the knob checked for full engagement before driving.
Front sway bars are often replaced together with the track bar, control arm bushings and front shocks on a lifted Wrangler, since those parts all share the load of the front suspension. Inspect the bar’s mounting bushings and end links for cracks, looseness or worn joints, and look for signs of wear at the disconnect hardware. A bar that rattles, clunks at low speed, or does not engage fully should be checked before use.
Specifications
| Brand | TeraFlex |
|---|---|
| Part number | TER1753720 |
| Product line | Dual Rate S/T |
| Mounting location | Front |
| Spring rate | Dual rate (two torsion bars) |
| Operation | Manual disconnect with engagement knob |
| Fitment | Direct fit |
Vehicle fitment
The kit fits the 2007–2018 Jeep Wrangler (JK) in Rubicon, Sahara, Sport and X models, in both two-door and four-door bodies, including the Unlimited Rubicon, Unlimited Sahara, Unlimited Sport and Unlimited X versions.
The list covers the JK generation only, so earlier Wrangler models and the 2018 and newer JL models are not included. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Because the kit replaces the front sway bar, check the mounting points and the disconnect link against your truck before ordering. The trail setting is meant for articulation, so check the engagement knob after installation.
What’s included
One dual rate front sway bar system with two torsion bars and the engagement knob.








