Overview
The Trail Gear Trail-Creeper crawl box, part number 100500-1-KIT, is a low range reduction box for Toyota transfer cases. It fits the 1979 to 1995 Toyota Pickup and the 1985 to 1995 Toyota 4Runner. It is built for a dual transfer case setup and bolts onto the front of a top-shift, gear-driven Toyota transfer case.
The Trail-Creeper is a reduction box, not a complete transfer case. It is completely rebuilt and inspected, and its low range gear ratio is 2.28. It is available with 21 or 23 spline input and output gears. It is built as two reduction boxes bolted back to back with a dual case adapter, and that pair bolts to a 4WD section.
Key features
- Low range gear ratio of 2.28
- 21 or 23 spline input and output gears
- Designed to bolt onto the front of a top-shift, gear-driven Toyota transfer case
- Completely rebuilt and inspected
- Part of a dual transfer case build with a dual case adapter
Planning a dual transfer case
A crawl box adds a low range reduction to a transfer case, so the drivetrain works differently at low speed. Because the gear ratio multiplies torque, the rest of the driveline sees higher loads when crawling. Check the shafts, U-joints and axle components for wear before adding a reduction box, since older joints can fail under the extra torque.
Dual transfer case builds often need a new shifter location, a floorboard opening and driveshaft length changes. Plan the layout and mounts before cutting, and confirm clearance under the cab and over the crossmember. Use the correct fluid for each case after installation, and check for leaks after the first off-road outing.
- Inspect U-joints and shafts before the build
- Plan shifter and floorboard placement
- Check case fluid levels after install
Specifications
| Brand | Trail Gear |
|---|---|
| Part number | 100500-1-KIT |
| Product type | Trail-Creeper crawl box (reduction box) |
| Low range gear ratio | 2.28 |
| Gear splines | 21 or 23 spline input and output |
| Mounts to | Front of a top-shift, gear-driven Toyota transfer case |
| Fitment type | Direct fit |
Vehicle fitment
It fits the 1985 to 1995 Toyota 4Runner (DLX and SR5) and the 1979 to 1995 Toyota Pickup.
Close vehicles that are not on the list include Toyota trucks and 4Runners outside those years, and any Toyota with a transfer case that is not a top-shift, gear-driven unit. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Dual transfer case installation requires floorboard and drive shaft modifications. Plan that work before bolting the crawl box in place.
What’s included
The crawl box is completely rebuilt and inspected. The dual case adapter, bolts, floorboard parts and drive shafts are not included, so check what is needed before ordering the build.









