Overview
The Rigid Industries SR-Q Series LED Back Up Light is a kit with two diffused single-row quad lights in 6064 aluminum housings. The kit includes an extended wire harness and the necessary hardware, so the back up lights can be fitted from one package.
The installation is OE quality. The lights include a durable polycarbonate lens and a GORE pressure equalizing vent, are IP68 certified and produce zero UV emissions. The lights have a 50,000-hour lifespan, instant on and off with no warm-up, and are RoHS compliant.
Key features
- Diffused single-row quad design
- Extended wire harness and necessary hardware
- 6064 aluminum housing
- Durable polycarbonate lens
- GORE pressure equalizing vent
- IP68 certified, zero UV emissions, RoHS compliant
Reverse light wiring and seal care
Back up lights are often regulated, so check local rules on brightness, color and when they may operate before wiring. Connect the harness so the lights switch on only with reverse, and route it along the body, away from the hitch, moving parts and sharp edges. A short, tidy run is easier to inspect and protects the connections from road spray.
The flush housing relies on its seal, so inspect the gasket and lens edge after washing the vehicle or driving through deep water. Clean the lens with mild soap and water rather than harsh solvents, which can cloud polycarbonate over time. If moisture appears inside the housing, remove the light and dry it before corrosion reaches the connections.
- Confirm reverse-only switching
- Inspect the gasket after water crossings
- Clean the lens with mild soap
Specifications
| Brand | Rigid Industries |
|---|---|
| UPC | 849774017704 |
| Series | SR-Q Series |
| Sold as | Kit with 2 LED lights |
| Light type | LED back up light |
| LED arrangement | Single row quad |
| Beam pattern | Diffused |
| Housing | 6064 aluminum |
| Ingress rating | IP68 certified |
| Rated life | 50,000 hours |
Vehicle fitment
This kit is not made for one vehicle, and the owner checks each vehicle’s surface before fitting. Its flush installation needs a clean opening in the rear panel.
Installation notes
Run the extended harness to the reverse circuit and use the supplied hardware for the flush fit. Keep the wiring clear of moving parts, and check local rules on back up lights before wiring them to a road-going vehicle.
What’s included
The kit holds two diffused single-row quad lights, an extended wire harness and the necessary hardware.









