Overview
The Pro Comp Suspension 76201 is a six-way universal switch panel for controlling auxiliary electrical accessories. Its face is aluminum and glass, which Pro Comp describes as waterproof for use in all weather.
Key features
- Six way switch panel
- Waterproof aluminum and glass face
- Push button switches
- Red or blue illumination
Planning the switch circuits
A switch panel is only as useful as the wiring behind it. Before installing, decide which accessories each switch will control, and note the current each one draws. Keep the most important loads on their own circuits so one fault does not disable the whole panel.
Fuses should be sized to each accessory rather than to the panel as a whole. A relay is often used for high current lights and pumps so the switch carries only a small signal. Label each switch clearly, since push button layouts can look alike in low light.
Connections are a common source of trouble. Use sealed connectors where wires join, route the harness away from heat and moving parts, and check the ground points regularly. Water can still find its way into poor wiring, even on a waterproof panel.
- Assign each switch to one accessory
- Fuse each circuit at the battery end
- Seal connections and check ground points
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 76201 |
| Switch count | Six way |
| Switch type | Push button |
| Illumination color | Red or blue |
| Waterproof | Yes |
| Fitment | Universal fit |
Vehicle fitment
This switch panel is universal fit and is not built for one vehicle. Confirm the circuits you plan to run and check the wiring diagram for your vehicle before installing.
Installation notes
Each switch should be wired through a fuse for the accessory it controls, so size the fuses to the loads on the panel.
What’s included
One six-way universal switch panel.


















