Overview
The Smittybilt XRC Gen2 Rear Bumper in light texture black, part number 76858LT, is the next-generation XRC rear bumper for Jeep owners. It has raised corners for better entry and exit angles, solid D-ring mounts with an integrated jack point, a Class III hitch and a cutout for an auxiliary back-up light.
Smittybilt designed the Gen2 for owners running oversized tires. The bumper is made from 3/16-inch cold rolled steel with a powder coat finish. The solid D-ring mounts are welded on the inside and out and also act as a recovery point.
The design is modular, so a tire carrier can be added later as a separate part, Smittybilt S/B76857, sold separately. Lights are included with this bumper.
Key features
- Light texture black powder coat finish
- Raised corners for better entry and exit angles
- Solid D-ring and jack point mount, welded inside and out
- Towable D-ring mounts
- Class III hitch with an anti-rattle provision for the receiver
- Aux back-up light cutout
- Modular design, tire carrier can be added later
Choosing a rear bumper setup
A rear bumper does more than protect the back of the vehicle, since it also carries the hitch, recovery points and any lights you add. Think about how the bumper will be used before buying. A setup built for towing and recovery puts more load on the mounts, while a light setup mainly needs clean wiring and a secure cutout.
The hitch receiver should be checked for play before towing, and the anti-rattle fitting should be tightened so the receiver stays firm. After recovery use, look over the D-ring mounts, welds and bolts, since those parts take the load. A tire carrier adds weight at the rear, so the shocks and suspension should be inspected if one is installed later.
- Check hitch play before towing
- Inspect D-ring mounts after recovery
- Recheck bolts after the first trips
Specifications
| Brand | Smittybilt |
|---|---|
| Part number | 76858LT |
| UPC | 631410137200 |
| Series | XRC Gen2 |
| Material | 3/16-inch cold rolled steel |
| Finish | Light texture black powder coat |
| Hitch | Class III receiver hitch |
| D-ring mounts | Solid, towable, with jack point |
| Fit type | Direct fit |
| Warranty | 5 Year Limited Warranty; a Limited Lifetime Warranty is also offered. |
Vehicle fitment
This bumper is for Jeep owners. Confirm the exact Jeep model, year and trim before ordering.
Without a stated model, do not assume the bumper fits every Jeep; XRC bumpers for other Jeep models carry different part numbers. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The anti-rattle provision for the receiver hitch is meant to keep the hitch tight when towing. If you plan to add the optional tire carrier later, use the carrier Smittybilt names, S/B76857.
What’s included
- Smittybilt XRC Gen2 rear bumper in light texture black
- Class III hitch
- Solid D-ring mounts with jack point
- Lights are included with the bumper.
Not included: the tire carrier, which is a separate Smittybilt part (S/B76857).




































