Overview
The Smittybilt 614841 is a textured M1 rear bumper for 2014–2016 Toyota Tundra pickups, including the SR, SR5, Limited, Platinum, TRD Pro and 1794 Edition versions.
It is built from 3/16-inch and 1/4-inch cold roll steel and finished in a two-stage matte black powder coat. The bumper uses solid mount D-rings and bolts on with no drilling required.
Key features
- Textured finish
- Two-stage matte black powder coat
- Solid mount D-rings
- 3/16-inch and 1/4-inch cold roll steel
- No drilling required for the bolt-on
Swapping the stock bumper
Replacing a stock bumper is mostly a matter of removing the old fasteners cleanly and checking the mounting points before the new steel goes on. Rust on frame brackets is common on older trucks, so clean and inspect the brackets before the bumper is set in place. A bumper that sits square on its mounts keeps the lights and the hitch aligned.
Textured powder coat resists small scrapes, but deeper chips can expose steel. Address chips soon after they appear, then clean the area and apply a matching touch-up paint. Check mounting bolts after the first drives, since a new bumper can settle slightly as the truck works.
- Clean the frame brackets before fitting
- Check that the bumper sits square on its mounts
- Touch up chips before rust forms
- Confirm hitch and tow clearance after installation
Specifications
| Brand | Smittybilt |
|---|---|
| Part number | 614841 |
| UPC | 631410121124 |
| Product line | M1 |
| Position | Rear |
| Fitment type | Direct fit |
| Material | 3/16-inch and 1/4-inch cold roll steel |
| Finish | Textured; two-stage matte black powder coat |
| D-ring mount | Solid mount; not included with the bumper |
| Receiver hitch | Not included |
| Tire carrier | Not included |
Vehicle fitment
It fits 2014–2016 Toyota Tundra pickups.
It does not fit Tundra years from 2013 and earlier or from 2017 on, or any other Toyota model. Confirm fit for your vehicle’s year, model and trim before ordering.
Installation notes
The M1 bolts on with no drilling required.
What’s included
The bumper.
Not included: D-ring mounts are not included with the bumper. The bumper is designed for solid 7/8-inch D-rings, so plan on fitting them separately and check the package contents against your installation before starting.




















