Overview
The Smittybilt XRCTJ2 is an XRC bumper package in a two stage matte black powder coat. It has a front stubby-style bumper and a rear bumper with a tire carrier. The XRC design has high approach angles and raised corners for ground clearance.
The front stinger is 1.75 tubing with two light tabs for up to two 9 inch lights, and the design can mount a winch up to 10,000 lb with an aluminum or roller fairlead. The rear bumper is 3/16″ cold rolled steel with a built-in class III receiver hitch and two solid D-ring mounts welded on the inside and out. The tire carrier has a billet handle with a camlock system, an adjustable tire mount and a safety catch that holds the swing away open while parked or at any angle.
Key features
- Front and rear XRC bumpers manufactured from 3/16″ solid plate
- Winch capable up to 10,000 lb, with an aluminum or roller fairlead
- Front stinger with two light tabs for up to two 9 inch lights
- Rear class III receiver hitch
- Rear D-ring mounts welded on the inside and out
- Tire carrier with billet handle and camlock system
- Complete bolt-on that requires no modifications to the vehicle
Front and rear bumper setup
A full bumper package changes the front and rear of a vehicle at once, so plan the order of work. Mount the front bumper and check its alignment with the grille and headlights before fitting the rear. The rear bumper’s hitch and tire carrier should be checked for clearance against the tailgate and any rear lights.
Steel bumpers wear at the welds, mounts and finish first. Look for cracked welds after rough trail use, and touch up chips in the powder coat to slow rust. Clean the hitch opening so it does not collect debris that can make hitch pins hard to seat.
- Check front bumper alignment before the rear
- Confirm tire carrier clearance at the tailgate
- Inspect welds and mounts after rough trail use
- Keep the hitch opening free of debris
Specifications
| Brand | Smittybilt |
|---|---|
| Part number | XRCTJ2 |
| UPC | 70000563206 |
| Type | XRC front and rear bumper package with tire carrier |
| Material | Cold rolled steel, 3/16″ solid plate |
| Finish | Two stage matte black powder coat |
| Maximum winch | 10,000 lb |
| Receiver hitch | Class III, built into the rear bumper |
| Light tabs | Up to two 9 inch lights |
| Warranty | 5-year limited |
Vehicle fitment
The package fits a specific vehicle, so confirm fit for your vehicle’s year, model and trim before ordering.
Match the part number to your vehicle’s year, model and trim before ordering.
Installation notes
Smittybilt says each bumper is a complete bolt-on that requires no modifications to the vehicle. The tire carrier’s safety catch lets the swing away stay open while parked.
What’s included
- XRC front bumper with winch capability
- XRC rear bumper with class III receiver hitch and D-ring mounts
- Tire carrier
Not included: a winch, fairlead and lights.


























