Select your vehicle

Smittybilt SRC Gen2 Front Bumper Package with Tire Carrier (Black) – BMPRPKG2.2

Smittybilt

Shop Jeep Wrangler JK Front Bumpers on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Fits 2007-2016 Jeep Wrangler JK, 2-door and 4-door
  • SRC Gen2 bumper package with tire carrier, 3/16 inch steel
  • Tire carrier with one-handed opening, CB and jack mount, Roto Pax holder
  • Winch plate rated up to 12k; 2 inch Class III receiver

Description

Overview

The Smittybilt SRC Gen2 front bumper package with tire carrier in black, part number BMPRPKG2.2, is a full-width steel bumper package for the 2007-2016 Jeep Wrangler JK. It adds a tire carrier with a one-handed opening operation, tuned to the factory tailgate, and a CB and jack mount with a Roto Pax gas can holder.

The package is built from 3/16 inch steel, with solid plate center sections that wrap the frame horns and lower crossmembers. The lower design winch plate is rated for a winch up to 12k and allows more airflow, and the rear bumper includes a 2 inch Class III receiver. The bumpers bolt directly to the vehicle and carry a 5-year limited warranty.

Key features

  • Tire carrier with a tuned one-handed opening operation
  • CB and jack mount and Roto Pax gas can holder
  • Textured black powdercoat
  • 3/16 inch steel with solid plate center sections that wrap the frame horns
  • Lower design winch plate for airflow, rated up to 12k
  • OE fog light provision
  • 2 inch Class III receiver
  • New max solid D-ring and jack point mount, welded inside and out
  • Two D-ring mounts included
  • 5-year limited warranty

Tire carrier considerations

A tire carrier moves the spare and any gear from the roof or cargo floor to the rear of the vehicle, which shifts weight and changes how the rear end responds on uneven ground. Heavier spares and added containers raise the load on the carrier and its mounts, so keep the rear weight reasonable and secure everything before moving.

Before installing, confirm the spare tire clears the carrier arm and the tailgate swings open without contacting the tire. After the first few drives, recheck the carrier bolts, since stacked weight and rough roads loosen fasteners over time. During routine maintenance, inspect the pivot and carrier arm for cracks or play.

Rear-mounted tires limit access to the cargo area, so consider how often you reach into the rear and plan packing around it. Many owners keep lighter items on a roof rack and reserve the carrier for the spare and heavier gear, while keeping the total within the vehicle’s rated payload.

  • Keep the spare tire inflated and secured
  • Check the carrier pivot for play
  • Recheck bolts after rough trail use

Specifications

Brand Smittybilt
Part number BMPRPKG2.2
UPC 631410130676
Product type Bumper package with tire carrier, SRC Gen2
Width Full
Material Steel, 3/16 inch
Finish Powder coat, textured black
Winch capacity Up to 12k
Winch mount Included
D-ring mounts Included (two)
Light mounts Included
Receiver 2 inch Class III
Tire carrier Included, with CB and jack mount and Roto Pax holder
Body styles 2 and 4-door models
Warranty 5-year limited
Fit type Direct fit

Vehicle fitment

The manufacturer fitment list for BMPRPKG2.2 covers the 2007-2016 Jeep Wrangler (JK), in 2-door and 4-door versions.

It covers 2007-2016 Jeep Wrangler JK models only, and the TJ, LJ, YJ and JL are outside its coverage. Verify that your vehicle’s year, model and trim match before ordering.

Installation notes

The tire carrier opening is tuned to the factory tailgate, which is how Smittybilt describes its one-handed operation.

What’s included

  • SRC Gen2 bumper package in textured black powdercoat
  • Tire carrier with CB and jack mount and Roto Pax gas can holder
  • Two D-ring mounts
  • Winch plate and light mounts

Not included: the winch, the Roto Pax gas can and lights.

SKU: S/BBMPRPKG2.2 Category:

Specification

Shipping weight 347.00 lbs
Package dimensions 80.00 × 78.00 × 18.00 in
brands

Fitment

VehicleYearsTrims
Jeep Wrangler (JK)2007–201670th Anniversary, Rubicon, Sahara, Sport, Sport S, Unlimited 70th Anniversary, Unlimited Rubicon, Unlimited Sahara, Unlimited Sport, Unlimited Sport S, Unlimited X, X

Use “Select your vehicle” at the top of the page to check this part against your vehicle.

Questions & Answers

Which Wranglers does Smittybilt BMPRPKG2.2 fit?

It fits the 2007-2016 Jeep Wrangler JK in both 2-door and 4-door versions. Other Wrangler generations are outside its coverage, so verify your year, model and trim before buying.

What does the tire carrier on BMPRPKG2.2 offer?

It has a tire carrier with a one-handed opening operation tuned to the factory tailgate. It also includes a CB and jack mount and a Roto Pax gas can holder, so the carrier handles spare tire and gear storage in one unit.

What winch size will BMPRPKG2.2 hold?

The lower design winch plate is rated to accommodate up to a 12k winch, and sits low for greater radiator airflow. The winch itself is not part of the package.

Is there a Class III hitch on BMPRPKG2.2?

Yes. The rear bumper includes a 2 inch Class III receiver that bolts to the factory mounting points. The package also includes two D-ring mounts.

Does the tire carrier change how the rear hatch opens?

Yes. A carrier on the rear bumper sits in the path of the hatch, so access to the cargo area changes. Check tailgate clearance with the spare in place before loading, and again after any adjustment.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop Jeep Wrangler JK Front Bumpers on Amazon