Select your vehicle

Smittybilt Sure Step 3″ Diameter Side Bars (Stainless Steel) – FN1995-S4S

Smittybilt

Shop Ford F-150 Nerf Steps on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Fits the 2015–2020 Ford F-150 in its King Ranch, Lariat, Limited, Platinum, Police Responder, SSV, XL and XLT versions
  • Stainless steel 3-inch side bar, sold as a pair
  • Non-slip polyester pads secured by five pins in a squashed step
  • No drilling required; mounting hardware included

Description

Overview

The Smittybilt FN1995-S4S is a stainless steel side bar, sold as a pair, for the 2015–2020 Ford F-150. It fits the King Ranch, Lariat, Limited, Platinum, Police Responder, SSV, XL and XLT versions of that generation.

The bar is 3 inches in diameter and made from steel with a stainless finish. Each step pad is non-slip polyester, secured with five pins set into a squashed step, which leaves no exposed metal to rust. The frame and body mount holds the bar with an oversize bolt attachment so that the tube does not bounce.

No drilling is needed, and mounting hardware comes with the pair. The bar is a Sure Step design, the line name for this series.

Key features

  • Stainless steel finish
  • Three-inch bars made from steel
  • Non-slip polyester step pads
  • Five pins hold each pad in a squashed step
  • No exposed metal to rust
  • No drilling required
  • Mounting hardware included
  • Sold as a pair

Protecting the finish

A steel tube with a stainless finish gives strength for daily use, and the polished surface helps it shed road grime. Protecting the finish means rinsing away salt and mud, then drying the bar so moisture does not sit under the pads. Pay attention to scratches near the brackets, since they are where rust usually begins.

The step pads are the part that gets the most use. Non-slip polyester wears slowly, but pins can loosen over time. Re-check each pin after the first few trips and replace a pad that rocks or shows cracks. A firm pad keeps the step predictable for passengers climbing in.

Choose tire size with the step height in mind. Larger tires or a suspension lift raise the step and can shift the clearance at the rear wheel, so measure before you drive off road. Keeping the frame and body mount bolts snug is the simplest way to stop the bar from bouncing over time.

Specifications

Brand Smittybilt
Part number FN1995-S4S
Finish Stainless steel
Material Steel
Tube diameter 3 inches
Step pads Non-slip polyester, secured with five pins
Installation No drilling required
Quantity Sold as a pair

Vehicle fitment

It fits the 2015–2020 Ford F-150 in its King Ranch, Lariat, Limited, Platinum, Police Responder, SSV, XL and XLT versions. The 2009–2014 and 2004–2008 F-150 bars are not covered by this fit, and Super Duty trucks are excluded. Verify your year, model and trim against the fitment before buying.

The 2009–2014 and 2004–2008 F-150 bars are different listings, and the Super Duty trucks are not covered. Confirm your vehicle’s year, model and trim before ordering.

What’s included

The box holds both stainless bars, their pads and the hardware.

SKU: S/BFN1995-S4S Categories: , ,

Fitment

VehicleYearsTrims
Ford F-1502015–2020King Ranch, Lariat, Limited, Platinum, Police Responder, SSV, XL, XLT

Use “Select your vehicle” at the top of the page to check this part against your vehicle.

Questions & Answers

Will the FN1995-S4S fit a 2018 Ford F-150 Platinum?

Yes. The list covers the 2015 to 2020 F-150, which includes 2018, and names the Platinum version. Check the rest of your truck's details against the list before ordering.

Is drilling required?

No. Drilling is not required, and mounting hardware is included with the pair. Both bars come in one set, so each side of the cab can be fitted from the same box.

What finish does it have?

It has a stainless steel finish over a steel tube, with non-slip polyester step pads held in place by five pins.

How often should the frame and body mounts be inspected?

Inspect the mounts after the first few trips, then at every oil change or service. Look for rust, cracked welds, movement at the bracket and bolts that have backed off. Tighten any loose fasteners and replace parts that show damage.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop Ford F-150 Nerf Steps on Amazon